Owner's Manual

22
ENGLISH
STATUS Shows the status of the selected device.
IOS CONNECTED : You are able to use the application using
the iPhone/iPod connected via Bluetooth or USB input
terminal.
IOS NOT CONNECTED : No IOS device is connected to use
the application.
ANDROID CONNECTED : You are able to use the
application using the Android smartphone connected via
Bluetooth.
ANDROID NOT CONNECTED : No Android device is
connected to use the application.
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via
Bluetooth on this unit.
Press
repeatedly to select iPodBT.
• You can operate the iPod/iPhone in the same way as
iPod/iPhone via USB input terminal.
( 8)
• If you plug in an iPhone/iPod to the USB input
terminal while listening to iPodBT source, the source
automatically change to iPodUSB. Press
to select
iPodBT if the device is still connected via Bluetooth.
BLUETOOTH®
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s operations from
the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via
Bluetooth).
Preparation:
Install the latest version of JVC Remote application on your device before connecting.
For more information, visit <http://www.jvc.net/cs/car/>.
1 Press and hold .
2 Turn the volume knob to select an item ( see the following table ) , then press the
knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
REMOTE APP
SELECT
Select the device (IOS or ANDROID) to use the application.
IOS YES :Selects iPhone/iPod to use the application via Bluetooth or connected via USB input
terminal.;
NO :Cancels.
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected via USB input
terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the USB input terminal.
– You change from iPod USB source to iPod BT source.
ANDROID YES :Selects Android smartphone to use the application via Bluetooth.; NO : Cancels.
ANDROID
LIST
*
Selects the Android smartphone to use from the list.
*
Displayed only when [ANDROID] of [SELECT] is set to [YES] .
JS_JVC_KD_R995BTS_K_EN_03.indd 22 7/6/2017 8:40:55 AM