Owner's Manual

ENGLISH
5
F/W UPDATE
UPDATE SYSTEM
F/W UP
xxxx
YES :Starts upgrading the firmware.;
NO :Cancels (upgrading is not activated).
For details on how to update the firmware,
visit <http://www.jvc.net/cs/car/>.
FACTORY
RESET
YES :Resets the settings to default (except the
stored station).;
NO :Cancels.
CLOCK
TIME SYNC
ON :The clock time is automatically set using
the Clock Time (CT) data in FM Radio Broadcast
Data System signal/FM Radio Data System
signal.;
OFF :Cancels.
CLOCK
DISPLAY
ON :The clock time is shown on the
display even when the unit is turned off.;
OFF :Cancels.
ENGLISH Select the display language for menu and
music information if applicable.
By default,
ENGLISH is selected.
ESPANOL
RADIO
“ST” or “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2 Press (or press on the remote control) to search for a station automatically.
(or)
Press and hold (or press and hold on the remote control) until “M” flashes,
then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
GETTING STARTED
JS_JVC_KD_R995BTS_K_EN_03.indd 5 7/6/2017 8:40:39 AM