Owner's Manual

9
5 Turn the volume knob to select a channel, then press the knob.
(or)
Press E / F to search for a channel manually.
• Pressing and holding E / F changes the channel rapidly.
If a locked channel or a mature channel (
[MATURE CH] is set to [ON] ) is selected, a
pass code input screen appears. Enter the pass code to receive the channel.
• To store a channel: You can store up to 18 channels. ( « 5)
• To select a stored channel: Press one of the number buttons (1 to 6).
(or)
1 Press MENU.
2 Turn the volume knob to select PRESET, then press the knob.
3 Turn the volume knob to select a preset number, then press the knob.
(or)
Press 5 / ∞ on RM-RK52.
Replay
1 Press the volume knob.
“ ” lights up and the unit memorize this paused position.
2 Press the volume knob to start Replay.
Replay starts from the paused position in step 1.
During Replay...
• To pause or resume playback, press the volume knob.
• To skip the current song backward/forward, press E / F (or 2 / 3 on RM-RK52).
• To rewind/fast-forward, press and hold E / F (or 2 / 3 on RM-RK52).
• To exit from Replay and go to live, press G.
Other settings
1 Press and hold MENU.
2 Turn the volume knob to select [SIRIUS XM] , then press the knob.
3 Turn the volume knob to make a selection (see the following table), then
press the knob.
4 Press MENU to exit.
Default: XX
CH LOCK To unlock settings:
1 Turn the volume knob to select a number.
2 Press E / F to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code. (Initial pass code is
0000.)
4 Press the volume knob to confirm.
CODE SET
1 Turn the volume knob to select a number.
2 Press E / F to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the new pass code.
• Make a note of the new pass code to enter channel lock settings from next time.
CH EDIT
*
1 T
urn the volume knob to select a category, then press the knob.
2 T urn the volume knob to select a channel you want to lock, then press the
knob.
“L” appears in front of the channel number.
3 Press G to exit.
CH CLEAR
* YES: Clears all the locked channels. ; NO: Cancels.
MATURE CH
ON: Turns on the Sirius XM-defined lock setting (mature channel). ; OFF: Turns off.
• If [ON] is selected, your setting (CH EDIT) is temporary ignored.
SIGNAL LVL
NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current
received signal.
BUF USAGE
0% — 100% (0): Shows the memory usage for Replay buffer.
* Displayed only when [MATURE CH] is set to [OFF] .
SiriusXM™
ENGLISH
EN_KD-A845BT[J]_f.indd 9 10/11/12 5:29:34 PM