Owner's Manual

ENGLISH
15
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
– For
KD-R960BTS : All the buttons and display flash.
– For
KD-AR865BTS / KD-R860BT : All the buttons flash.
– The unit answers the call automatically if [
AUTO ANSWER ] is set to a selected time. (  16 )
During a call:
– The buttons and display illuminate according to the settings made for [
COLOR ]. (  23 )
– If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate On the remote control
Answer a call
Press
or the volume knob.
Press
.
Reject a call
Press and hold
or the volume
knob.
Press and hold
.
End a call
Press and hold
or the volume
knob.
Press and hold
.
Adjust the phone volume
[
00 ] to [ 50 ] (Default: [ 15 ]*)
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
—
Switch between hands-
free and private talk
modes
Press the volume knob during a call.
• Operations may vary according to the
connected Bluetooth mobile phone.
—
* Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Turn the volume knob to make a selection
( see the following table ) , then press the
knob.
3 Repeat step 2 until the desired item is
selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
MIC LEVEL
–10 — +10 ( –4 ):The sensitivity of
the microphone increases as the number
increased.
NOISE RDCT –5 — +5 ( 0 ):Adjust the noise reduction
level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5 — +5 ( 0 ):Adjust the echo
cancellation delay time until the least
echo is being heard during a phone
conversation.
BLUETOOTH®
JS_JVC_KD_R960BTS_J_EN_f.indd 15 25/8/2014 4:01:37 PM