ENGLISH FRANÇAIS ESPAÑOL KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-R792BT / KD-R790BT / KD-RD99BTS / KD-RD79BT / KD-R99MBS CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS RECEPTOR CON CD MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. B5A-2125-00 [K] JS_JVC_KD_R995BTS_K_C.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference.
BASICS Faceplate Volume knob Other models can be remotely controlled with an optionally purchased remote control. Loading slot Remote sensor (Do not expose to bright sunlight.) KD-R995BTS: USB cable from the rear of the unit Detach button Attach Remote control (RM-RK52) (supplied for KD-R792BT) Display window Detach How to reset Pull out the insulation sheet when using for the first time. How to replace the battery Reset the unit within 5 seconds after detaching the faceplate.
GETTING STARTED 3 Set the basic settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 1 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. Cancel the demonstration To return to the previous setting item, press When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], 5), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” SYSTEM 1 Press the volume knob.
GETTING STARTED RADIO F/W UPDATE UPDATE SYSTEM F/W UP xxxx FACTORY RESET YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, visit . YES: Resets the settings to default (except the stored station). ; NO: Cancels. Search for a station CLOCK TIME SYNC ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal/FM Radio Data System signal. ; OFF: Cancels.
RADIO Other settings IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain. 3 Repeat step 2 until the desired item is selected/activated or follow MONO SET the instructions stated on the selected item. 4 Press to exit. ON: Improves the FM reception, but the stereo effect will be lost.
RADIO Default: XX TI ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up) while listening to all sources except in AM. ; OFF: Cancels. AREA N.AMERICA: For North/Central/South America, AM/FM intervals: 10 kHz/200 kHz. ; S.AMERICA: For some South American countries, AM/FM intervals: 10 kHz/50 kHz. ; EUROPE: For any other areas, AM/FM intervals: 9 kHz/50 kHz.
CD/USB/iPod/ANDROID Start playback The source changes automatically and playback starts. CD Label side Eject disc Selectable source: • KD-R995BTS: CD/USB FRONT/USB REAR/iPod FRONT/iPod REAR/ANDROID FRONT/ANDROID REAR • KD-R990BTS/KD-R895BTS/KD-R792BT/KD-R790BT/KD-RD99BTS/KD-RD79BT/KD-R99MBS: CD/USB/ iPod USB/ANDROID USB input terminal USB USB 2.0 cable*1 (commercially available) To On the faceplate Reverse/Fast-forward*3 Press and hold Select a track/file Press .
CD/USB/iPod/ANDROID Select control mode Select a file from a folder/list While in iPod FRONT/iPod REAR/iPod USB source, press repeatedly. HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you can still play/pause or file skip from this unit. While in ANDROID FRONT/ANDROID REAR/ANDROID source, press repeatedly. AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device.
Pandora® (except KD-R792BT) Preparation: Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4) Create and store a new station 1 Press . 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist.
iHeartRadio® (except KD-R792BT) Preparation: Install the latest version of iHeartAuto application on your device (iPhone/iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 4) Start listening 1 Open the iHeartAuto application on your device. 2 Connect your device to the USB input terminal. USB input terminal Accessory of the iPod/iPhone* To On the faceplate On the remote control Playback/pause Press the volume knob.
Spotify Preparation: Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify. • Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4) Start listening To On the faceplate Repeat play *3 Press Random play *3 repeatedly. ALL REPEAT, ONE REPEAT *1, REPEAT OFF repeatedly *1. Press ALL RANDOM, RANDOM OFF 1 Open the Spotify application on your device. 2 Connect your device to the USB input terminal.
SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS) Using SiriusXM tuner models later than SXV200: This unit can assign a maximum of 18 SmartFavorites channels. Initially, all preset channels are assigned as SmartFavorites. • “ ” appears at the last character of the channel name for the SmartFavorites channels. SiriusXM Replay™ While listening to a channel.... 1 Press the volume knob. “ ” lights up and the unit memorizes this paused position. 2 Press the volume knob to start Replay.
SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS) TuneScan™ CODE SET 1 Press the volume knob to enter [NEW CODE]. 2 Turn the volume knob to select a number. 3 Press to move to the entry position. 4 Repeat steps 2 and 3 to enter a new 4-digit pass code. 5 Press the volume knob to confirm. 6 Repeat steps 2 to 5 to reconfirm the pass code. • Make a note of the new pass code to enter channel lock settings for next time.
BLUETOOTH® BLUETOOTH — Connection Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) Connect the microphone MIC (microphone input terminal)* Microphone (supplied) Rear panel Pair and connect a Bluetooth device for the first time 1 Press to turn on the unit.
BLUETOOTH® Auto Pairing BLUETOOTH — Mobile phone When you connect iPhone/iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. – [AUTO PAIRING] is set to [ON]. ( 20) – JVC MUSIC PLAY application is installed on the Android device ( 8) and [AUTO MODE] is selected ( 9).
BLUETOOTH® To On the faceplate Default: XX On the remote control While talking on the first incoming call... MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –04): The sensitivity of the microphone increases as the number increased. Answer another incoming call and hold the current call Press or the volume knob. ( Not available ) NR LEVEL LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the noise reduction level until the least noise is being heard during a phone conversation.
BLUETOOTH® BATT/SIGNAL* KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS: AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels. * Functionality depends on the type of the phone used. DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. 3 Press the volume knob to call.
BLUETOOTH® Make a call from memory to enter Bluetooth mode. 1 Press 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call. “NO PRESET” appears if there is no contact stored. Bluetooth mode settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the stated on the selected item. 4 Press to exit. To return to the previous setting item, press . BT MODE Selects the phone or audio device to connect or disconnect.
BLUETOOTH® After pairing is successful, “PAIRING OK” “[Device Name]” appears and Bluetooth compatibility check starts. If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device to allow phonebook access to continue. “TESTING” flashes on the display. The connectivity result flashes on the display. “PAIRING OK” and/or “HANDS-FREE OK”*1 and/ or “AUD.
BLUETOOTH® Settings to use JVC Remote application STATUS JVC Remote application is designed to control the JVC car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth). Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit . 1 Press and hold .
BLUETOOTH® Internet radio via Bluetooth You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the iPhone/iPod touch/Android device via Bluetooth on this unit. • Make sure the USB input terminal is not connected to any device. Listen to Pandora (except KD-R792BT) Preparation: Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4) 1 Open the Pandora application on your device. 2 Connect your device via Bluetooth connection.
AUX AUDIO SETTINGS Use a portable audio player 1 Connect a portable audio player (commercially available). 3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available) Portable audio player 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), Auxiliary input jack 2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback.
AUDIO SETTINGS PRO EQ Adjust your own sound settings. • The settings are stored to [USER]. • The settings made may affect the current settings of [EASY EQ]. 62.5HZ LEVEL –09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) BALANCE *4 VOLUME ADJUST LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level).
AUDIO SETTINGS KD-R990BTS/KD-R792BTKD-RD99BTS: SOUND EFFECT SPACE ENHANCE SND RESPONSE (Not applicable for TUNER source.) SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ; OFF: Cancels. LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ; OFF: Cancels. SOUND LIFT LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. VOL LINK EQ ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres.
AUDIO SETTINGS Crossover settings Below are the available setting items for 2-way crossover and 3-way crossover. 2-way crossover setting items SPEAKER SIZE FRONT SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/ 6×9/7×10 TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) Caution Select a crossover type according to how the speakers are connected. ( 42, 43) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low.
AUDIO SETTINGS 3-way crossover setting items SPEAKER SIZE TWEETER SMALL/MIDDLE/LARGE MID RANGE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9 WOOFER *3 6.5"/8"/10"/12"/15" OVER/NONE (not connected) X ' OVER TWEETER HPF FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/12.5KHZ SLOPE –06DB/–12DB PHASE REVERSE (180°)/NORMAL (0°) GAIN –08DB to 00DB MID RANGE HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/ 150HZ/180HZ/220HZ/250HZ/THROUGH HPF SLOPE –06DB/–12DB LPF FRQ 1KHZ/1.6KHZ/2.
DISPLAY SETTINGS AUDIO SETTINGS Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS] If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determine the center of the currently set listening position as the reference point. 2 Measure the distances from the reference point to the speakers.
DISPLAY SETTINGS Default: XX DAY COLOR DISPLAY DIMMER BRIGHTNESS Dim the illumination. OFF: Dimmer is turned off. Brightness changes to [DAY] setting. ON: Dimmer is turned on. Brightness changes to [NIGHT] setting. ( [BRIGHTNESS]) DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob.
DISPLAY SETTINGS LEARNING STEERING REMOTE CONTROL (for KD-R792BT) MENU COLOR You can control the unit with the steering remote control keys on your vehicle. After connection, you can configure the control keys according to your preference. • You can only make this configuration if your vehicle is equipped with the electrical steering remote control. • If the steering remote control in your car is not compatible, configuration may not be completed and an error message may appear.
LEARNING STEERING REMOTE CONTROL (for KD-R792BT) 6 Press and hold any control keys on your steering remote control which you want to assign. A list of key functions will appear on the display. NONE (default)/MUTE/SEEK UP/SEEK DOWN/VOL UP/VOL DOWN/MODE/ON HOOK/ OFF HOOK/VOICE/ENTER 7 Turn the volume knob to select a function to assign, then press the knob. The selected key function is assigned to the steering remote control key you have selected in step 6. The display returns to the key list as on step 4.
REFERENCES Playable files • Playable audio file: For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
REFERENCES About Bluetooth • Depending on the Bluetooth version of the device, some Bluetooth devices may not be able to connect to this unit. • This unit may not work with some Bluetooth devices. • Signal conditions vary, depending on the surroundings. Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears or display will be blank.
REFERENCES Display information Source name KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS KD-R792BT/KD-R790BT/KD-RD79BT Station name (Date/Clock)*1 Shared/Radio (Date/Clock)*1 Song title (Artist) Song title Station name Shared/Radio Song title Artist name PANDORA FRONT/ Album name Playing time Clock Station name with music PANDORA REAR/PANDORA/ (Album name) Song title (Date/Clock)*1 Playing time (Date/Clock)*1 Station name PANDORA BT (Date) with music synchronisation*2 (back to the beginning) syn
TROUBLESHOOTING Sound cannot be heard. CD/USB/iPod Radio General “MISWIRING CHECK WIRING THEN PWR ON” appears. Symptom • Adjust the volume to the optimum level. • Check the cords and connections. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. Source cannot be selected. Check the [SOURCE SELECT] setting.
TROUBLESHOOTING “NO DEVICE” or “READING” keeps flashing. Playback is intermittent or sound skips. Pandora “CANNOT PLAY” • Make sure JVC MUSIC PLAY APP is installed on the Android device. ( 8) • Reconnect the Android device and select the appropriate control mode. ( 9) • If this does not solve the problem, the connected Android device does not support [AUTO MODE]. ( 33) • Switch off the developer options on the Android device. • Reconnect the Android device.
TROUBLESHOOTING Bluetooth® 38 Remedy “CH UNAVAIL” The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit . “CHECK ANTENNA” Check that the antenna and its connection are in good condition. “CHECK TUNER” Make sure the SiriusXM Vehicle Tuner is connected to the unit. “NO SIGNAL” Make sure the antenna is mounted outside the vehicle. “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” Your subscription is updated.
SPECIFICATIONS USB Standard USB 1.1, USB 2.0 (Full speed) Compatible Devices Mass storage class Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) File System FAT12/16/32 Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.
INSTALLATION/CONNECTION SPECIFICATIONS Audio Maximum Output Power 50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω) Full Bandwidth Power (at less than 1 % THD) 22 W × 4 Speaker Impedance 4Ω—8Ω Preout Level/Load (CD/USB) KD-R995BTS: 5 000 mV/10 kΩ load KD-R895BTS/KD-R99MBS: 4 000 mV/10 kΩ load General KD-R990BTS/KD-R792BT/KD-R790BT/ KD-RD99BTS/KD-RD79BT: 2 500 mV/10 kΩ load Preout Impedance ≤ 600 Ω Operating Voltage (10.5 V — 16 V allowable) 14.
INSTALLATION/CONNECTION Part list for installation (A) Faceplate Installing the unit (in-dash mounting) (B) Trim plate Do the required wiring. ( 42) (C) Mounting sleeve (D) Wiring harness Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car (E) Extraction key Bend the appropriate tabs to hold the sleeve firmly in place.
INSTALLATION/CONNECTION Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.
INSTALLATION/CONNECTION Connecting external components KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS: MIC (Microphone input terminal) ( 16) KD-R995BTS: USB cable (DC 5 V 1.5 A) (approx. 1.
libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
WHEN IT IS NOT REQUIRED TO DETACH THE FRONT CONTROL PANEL FROM THE MAIN UNIT, USETHE PROVIDED SCREWTO ATTACH THE CONTROL PANEL TO THE MAIN UNIT.
U.S.A. JVCKENWOOD USA Corporation TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVCKENWOOD USA Corporation warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below.
CANADA JVC JVCKENWODD CANADA INC. Warranty applies only to PRO!~~s~i~~~;Canada GARANTIE by JVCKENWOOD CANADA INC. JVCKENWOOD CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer. JVC warrants that this JVC product is free, under normal use and maintenance, from any defects in material and workmanship subject to the following terms and conditions: 1. To Obtain Warranty Service: 3.