CD Receiver Instructions

16
ENGLISH
2
Indication pattern changes
as you adjust the level.
Ex.: When “TRE” is selected
Indication Range
BAS*
2
(bass)
Adjust the bass.
–06 (min.) to
+06 (max.)
TRE*
2
(treble)
Adjust the treble.
–06 (min.) to
+06 (max.)
FAD*
5
(fader)
Adjust the front and rear
speaker balance. Set to
“00” if a two-speaker is
used.
R06 (Rear only)
to
F06 (Front only)
BAL*
5
(balance)
Adjust the left and right
speaker balance.
L06 (Left only)
to
R06 (Right only)
LOUD*
2
(loudness)
Boost low and high
frequencies to produce a
well-balanced sound at low
volume level.
LOUD ON
J
LOUD OFF
SUB. W
(subwoofer)
Adjust the connected
subwoofer output level.
00 (min.) to
08 (max.)
VOL*
3
(volume)
Adjust the volume.
00 (min.) to
30 or 50 (max.)*
4
*
1
Displayed only when “L/O MODE” is set to
“WOOFER” (see page 19).
*
2
When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
*
3
Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
*
4
Depending on the amplifier gain control
setting. (See page 19 for details.)
*
5
This adjustment cannot affect the subwoofer
output.
You can select a preset sound mode suitable to
the music genre.
~
Indication
(For)
Preset values
BAS
(bass)
TRE
(treble)
LOUD
(loudness)
USER
(Flat sound)
00 00 OFF
ROCK
(Rock or disco
music)
+03 +01 ON
CLASSIC
(Classical music)
+01 –02 OFF
POPS
(Light music)
+04 +01 OFF
HIP HOP
(Funk or rap music)
+02 00 ON
JAZZ
(Jazz music)
+02 +03 OFF
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Sound adjustments
Selecting preset sound modes
(C-EQ: custom equalizer)
EN12-17_KD-S52[J]f.indd 16EN12-17_KD-S52[J]f.indd 16 7/25/05 12:39:09 PM7/25/05 12:39:09 PM