ENGLISH DEUTSCH CD RECEIVER FRANÇAIS CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-SX1000R NEDERLANDS Detachable /I ATT SEL KD-SX1000R 40WX4 SSM 1 DISP PTY MO/RND LO/RPT INT TEXT 7 VCR SOUND TP RDS 8 2 VCR CONTROL 10 11 9 3 4 5 12 6 EXT CD-CH BAND TUNER CD For installation and connections, refer to the separate manual. Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung. Pour l’installtion et les reccordements, se référer au manuel séparé.
Position And Reproduction Of Labels Bottom panel of the main unit DANGER: Invisible laser radiation when open and interlock failed or defeated. AVOID DIRECT EXPOSURE TO BEAM. (e) ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgåudsættelse for stråling. (d) Name/Rating plate CLASS LASER VARNING:Osynlig laserstrålning när denna del är öppnadoch spärren är urkopplad. Betrakta ej strålen.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS .................................................... 4 RADIO BASIC OPERATIONS ......................................... 5 Listening to the radio ..................................................................... 5 Storing stations in memory ......................................
BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly, see page 26. 3 1 2 /I ATT Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 EXT BAND CD-CH TUNER CD Select the source. To operate the tuner, see pages 5 – 17. To operate the CD player, see pages 18 – 22. To operate the CD changer, see pages 40 – 42.
RADIO BASIC OPERATIONS ENGLISH Listening to the radio LO/RPT INT 1 2 1 BAND Select the band (FM1, FM2, FM3 or AM). TUNER You can select any one of FM1, FM2, and FM3 to listen to an FM station. F1 F2 F3 AM (FM1) (FM2) (FM3) Selected band appears. 2 SSM To search stations of higher frequencies. Start searching a station. When a station is received, searching stops. To search stations of lower frequencies.
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1,FM2 and FM3). 1 2 1 BAND Select the FM band number (FM1,FM2 or FM3) you want to store FM stations into.
ENGLISH Manual preset You can preset up to 6 stations in each band (FM1,FM2,FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 3 1 BAND Select the FM1 band. TUNER 2 Tune into a station of 88.3 MHz. SSM 3 1 7 VCR 1 See page 5 to tune into a station. 8 Press and hold the number button (in this example, 1) for more than 2 second. 2 Preset number and “MEMO” flashes alternately for a while.
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. DISP 2 1 BAND 1 Select the band (FM1,FM2,FM3 or AM) you want. TUNER F1 F2 F3 AM (FM1) (FM2) (FM3) 2 7 VCR 1 8 2 VCR CONTROL 10 11 9 3 4 5 12 6 Select the number (1 – 6) for the preset station you want. To change the display information while receiving an FM RDS station Press DISP.
RDS OPERATIONS ENGLISH What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular program signals. For example, the station send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON indicator lights up while receiving an FM station with the EON data.
Mode 1 (AF:on / REG:off) Network-Tracking is activated with Regionalization set to “off.” Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 (AF:on / REG:on) Network-Tracking is activated with Regionalization set to “on.
Standby Reception allows the unit to switch temporarily to a programme of your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, CD, and other connected components). Note: Standby Reception will not work if you are listening to an AM station.
Selecting Your Favorite Programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. 1, 4 3 1 2 SEL Press and hold the button for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 27). 2 Select “PTY STANDBY” if not shown on the display. SSM 3 Select one of twenty-nine PTY codes. (See the table on page 17.
ENGLISH To store your favorite programme types 2 1, 5 4 3 1 Press and hold the button for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 27). SEL 2 Select “PTY SEARCH” if not shown on the display. SSM 3 Select one of twenty-nine PTY codes. (See the table on page 17.) Selected code name appears on the display. • If the code already stored in memory is selected, it will flash on the display.
To search your favorite programme type 1 2 1 PTY Press and hold the button for more than 1 second while listening to an FM station. The last selected PTY code and preset number appear. 2 7 VCR 1 8 2 VCR CONTROL 10 11 9 3 4 5 12 6 Select one of PTY codes stored in preset number buttons (1 to 6). Ex. When “CLASSICS” is stored in preset number button 2. PTY search for your favorite programme starts after 5 seconds.
Automatic selection of the station when using the number buttons ENGLISH Other convenient RDS functions and adjustments Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen.
Automatic clock adjustment When shipped from the factory, the clock built in this unit is set to be readjust automatically using the CT (Clock Time) data in the RDS signal. If you do not want to use automatic clock adjustment, follow the procedure below. • See also “Changing the general settings (PSM)” on page 27. 1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower part of the display. 2. Select “AUTO ADJUST” with ¢ or 4 . 3.
Indications on the display No. Indications on the display 1 NEWS 16 W E A T HER 2 A F F A IR S 17 F IN A N CE 3 IN F O 18 C H ILD REN 4 SPORT 19 S O C IA L 5 EDUCATE 20 R E LIG I ON 6 D R A MA 21 P H O N E IN 7 C U LT U R E 22 T R A V EL 8 S C IE N C E 23 LE IS U RE 9 V A R IE D 24 JA Z Z 10 POP M 25 C O U N T RY 11 ROCK M 26 N A T IO N M 12 EASY M 27 O LD IE S 13 LIG H T M 28 F O LK M 14 C LA S S IC S 29 D O C U M ENT 15 OTHER M No.
CD OPERATIONS Playing a CD 1 1 Open the control panel. 2 1. Insert a disc into the loading slot. Th The unit turns on, draws a CD and starts playback automatically. 2. Close the control panel by hand. Total track number of the inserted disc Total playing time of the inserted disc Current track Elapsed playing time Notes: • When a CD is inserted up side down, “PLEASE EJECT” appears on the display. When you open the control panel by pressing 0, the CD automatically ejects.
¢ 4 ENGLISH Locating a track or a particular portion on a CD Number buttons To fast forward or reverse the track Press and hold ¢ , while playing a CD, to fast forward the track. Press and hold 4 , while playing a CD, to reverse the track. SSM To go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next track is located and played back.
Selecting CD playback modes MO/RND LO/RPT INT To play back tracks at random (Random Play) You can play back all tracks on the CD at random. MO/RND Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode turns on and off alternately. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly.
LO/RPT INT Each time you press LO/RPT/INT (Local/Repeat/Intro) briefly while playing a CD, CD intro scan mode turns on and off alternately. When the intro scan mode is turned on, “INTRO” appears on the display for 5 seconds and the track number flashes. The first 15 seconds of each track are played sequentially. ENGLISH To play back only intros (Intro Scan) Track number of the currently playing track Prohibiting CD ejection CD You can prohibit CD ejection and can lock a CD in the loading slot.
Playing the CD Text In a CD Text, some information about the disc (its disc title, performer and track title) is recorded. You can show these disc information on the display. DISP DISP Select text display mode while playing a CD Text. Each time you press the button, the display changes as follows: Disc Title / Performer Track Title Current track and Elapsed playing time Notes: • The display shows up to 12 characters at one time and scrolls if there are more than 12 characters.
Selecting preset sound modes You can select a preset sound adjustment suitable to the music genre: Each time you press SOUND, the sound control mode (SCM) changes as follows.
Adjusting the sound You can adjust the sound characteristics to your preference. 1 2 1 Select the item you want to adjust. SEL BASS VOLUME Indication BASS TREBLE LOUDNESS FADER BALANCE To do: Adjust the bass Range –06 (min.) — +06 (max.) TREBLE Adjust the treble –06 (min.) — +06 (max.
You can adjust the sound modes (BEAT, SOFT, POP: see page 23) to your preference and store your own adjustments in memory. ENGLISH Storing your own sound adjustments 2 3 1,4 1 SOUND Call up the sound mode you want to adjust. See page 23 for details. 2 SEL Select "BASS", "TREBLE" or "LOUDNESS." 3 Within 5 seconds Adjust the selected item. See page 24 for details. 4 SOUND Press and hold the button until the setting selected in step 2 appears and starts flashing on the display.
OTHER MAIN FUNCTIONS Setting the clock You can also set the clock system either to 24 hours or 12 hours. (See page 29.) 1 6 3, 5 2, 4 1 SEL 2 Press and hold the button for more than 2 seconds so that “PSM” appears on the lower part of the display. 3 Set the hour. 2 1 1 Select “CLOCK HOUR” if not shown on the display. 2 Adjust the hour. SSM 4 5 Set the minute. 2 1 1 Select “CLOCK MINUTE.” 2 Adjust the minute. SSM 6 DISP Start the clock.
You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. ENGLISH Changing the general settings (PSM) Basic Procedure 1 3 1 2 SEL Press and hold the button for more than 2 seconds so that “PSM” appears on the lower part of the display. 2 Select the PSM item you want to adjust. (See page 28.) SSM 3 Select or adjust the PSM item selected above. 27 EN26-33.KD-SX1000R[E]/1 27 98.6.
1 2 SEL SSM 3 Select. Factory-preset settings See page 0:00 26 Set. CLOCK HOUR Hour adjustment Back Advance CLOCK MINUTE Minute adjustment Back Advance CLOCK24H/12H 24/12-hour time display 12HOUR 24HOUR 24HOUR 29 AUTO ADJUST Automatic setting of the clock OFF ON ON 16 DISPLAY MODE Display mode FREQUENCY PS NAME PS NAME 15 PTY STANDBY PTY standby PTY SEARCH PTY search TA VOLUME Traffic announcement volume LEVEL METER Level display 29 programme types (See page 17.
You can change the clock built in this unit either to 24 hour system or 12 hour system. 1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower part of the display. 2. Select the “CLOCK24H/12H” mode with ¢ or 4 . 3. Select “CLOCK 24HOUR” or “CLOCK 12HOUR” with the control dial. The clock built alternates between 24 hour system and 12 hour system.
Controlling the volume automatically (Audio Cruise Mode) You can select the proper cruise mode for your car. This unit change the volume level automatically (at 3 possible levels) based on the driving speed of your car by detecting the alternator’s generating frequency (Audio Cruise). If you want to use this mode, follow the procedures below. When shipped from the factory, this mode is set to “OFF.” • 1: Select this if your car is relatively quiet. • 2: Select this if your car is relatively loud.
If you find Audio Cruise increases (or decreases) the volume either too much or too little as the driving speed changes. You can adjust the increase rate by changing the boost level. To change it, follow the procedure below. ENGLISH To adjust the volume increase rate 1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower part of the display. 2. Select “CRUISE MODE” with ¢ or 4 . 3. Select either “CRUISE 1” or “CRUISE 2” with the control dial. 4.
Selecting the telephone muting This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated. • MUTING 1: Select this if this setting can mute the sounds. • MUTING 2: Select this if this setting can mute the sounds. • OFF: Cancels the telephone muting. 1.
You can adjust the display contrast level (among 1 to 10). When shipped from the factory, the display contrast level is at level 5. 1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower part of the display. 2. Select “CONTRAST” with ¢ or 4 . 3. Select the desired mode with the control dial. ENGLISH Adjusting the contrast level Selecting the scroll mode You can select the scroll mode for the name display and disc information if it consists of more than 12 characters.
Assigning names to the sources You can assign a name to a CD and the external component connected to the LINE IN plugs. After assigned a name, it will appear on the display when you select it. Sources CDs External component Maximum number of the characters up to 32 characters (up to 40 discs) up to 12 characters 2, 3, 7 5 4 1 Select a source you want to assign a name to. 2 DISP Press and hold SEL (select) for more than 2 seconds while pressing DISP.
DISP Select the character set you want while “ ” is flashing. ENGLISH 3 Each time you press the button, the character set changes as follows: Capital letters Small letters Numbers and symbols 4 Select a character. About the available characters, see page 36. 5 Move the cursor to the next (or previous) character position. SSM 6 7 Repeat steps 3 to 5 until you finish inputting the name. SEL Press the button while the last selected character is flashing. The input name is stored in memory.
Available characters Capital letters A B C D E F G H I J K L M N O P Q R S T U V W X Y Z space Small letters a b c d e f g h i j k l m n o p q r s t u v w x y z space Numbers and symbols 0 1 2 3 4 5 6 7 8 9 ! ” # $ % & ’ ( ) + , – . / : ; < = * > ? @ _ ` space 36 EN34-36.KD-SX1000R[E]/1 36 98.6.
You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 2 3 How to attach the control panel 1 Unlock the control panel. Pull the control panel out of the unit. Put the detached control panel into the provided case.
REMOTE OPERATIONS Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Remote sensor Installing the batteries When it becomes necessary to bring the remote controller close to the remote sensor for it to work, the battery is running low, at this point, the battery should be replaced.
1 5 2 6 3 4 7 1 Functions the same as the button on the main unit. 2 • Functions as the BAND button while listening to the radio. Each time you press the button, the band changes. • Functions as the DISC + button while listening to the CD changer. Each time you press the button, the disc number increases, and the selected disc starts playing. • Does not function as the PROG button. 3 • Functions as the PRESET button while listening to the radio.
CD CHANGER OPERATIONS We recommend that you use one of the CH-X series (ex: CH-X1200) with your unit. If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT dealer for connections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) for connecting it to this unit. Before operating your CD automatic changer: • Refer also to the Instructions supplied with your CD changer.
Press and hold ¢ , while playing a CD, to fast forward the track. Press and hold 4 , while playing a CD, to reverse the track. SSM ENGLISH To fast forward or reverse the track To go to the next track or the previous track SSM Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next track is located and played back. Press 4 briefly, while playing a CD, to go back to the beginning of the current track.
Selecting CD playback modes MO/RND LO/RPT INT To play back tracks at random (Random Play) MO/RND Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode changes as follows: RANDOM1 RANDOM2 Canceled Mode RND Indicator RANDOM1 Lights All tracks of the current disc, then the tracks of the next disc, and so on. Plays at random RANDOM2 Flashes All tracks of all discs inserted in the magazine.
After connecting a VCR (KV-V10) to the LINE IN plugs, you can perform the following operations. You can also connect the TV to this unit. Playing VCRs 2 1 EXT Each time you press the button, you can select the CD automatic changer and the external component alternately. 7 VCR 1 1 Select the external component. CD-CH 2 ENGLISH EXTERNAL COMPONENT OPERATIONS 8 2 VCR CONTROL 10 11 9 3 4 5 12 6 Operate VCRs. VCR 3: 7: 1: ¡: : Turns on and off. Starts playing. Stops operations.
MAINTENANCE Handling CDs This unit has been designed only to reproduce the CDs bearing the Other discs cannot be played back. COMPACT and marks. DIGITAL AUDIO How to handle CDs When removing a CD from its case, press down the center holder of the case and lift the CD out, holding it by the edges. • Always hold the CD by the edges. Do not touch its recording surface. Center holder When storing a CD into its case, gently insert the CD around the center holder (with the printed surface facing up).
What appears to be trouble is not always serious. Check the following points before calling a service centre. Symptoms Causes Remedies • CD cannot be played back. CD is inserted upside down. Insert the CD correctly. • CD sound is sometimes interrupted. You are driving on rough roads. Stop CD play while driving on rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. The volume control is turned to the minimum level.
SPECIFICATIONS AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel Continuous Power Output (RMS): Front: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8 % total harmonic distortion. Rear: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8 % total harmonic distortion.
VICTOR COMPANY OF JAPAN, LIMITED V EN, GE, FR, NL KD-SX1000R[E]COVER J 2 C Printed in Singapore 0698MNMMDWJES 98.6.
