CD RECEIVER KD-SX650 ENGLISH RECEPTOR CON CD KD-SX650 ESPAÑOL RECEPTEUR CD KD-SX650 FRANÇAIS ATT BAND PROG DISC FUNC DISC PRESET COMPACT For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé. DIGITAL AUDIO For customer Use: INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS Enter below the Model No. and Serial No.
ENGLISH INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. ENGLISH CONTENTS BASIC OPERATIONS .................................................... 4 RADIO OPERATIONS ................................................... 5 Listening to the radio ..................................................................... 5 Storing stations in memory ..................................
ENGLISH BASIC OPERATIONS Note: When you use this unit for the first time, set the built-in clock correctly, see page 19. 2 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. CD To operate the tuner, see pages 5 – 9. To operate the CD player, see pages 10 – 12. To operate the CD changer, see pages 24 – 26.
RADIO OPERATIONS 1 ENGLISH Listening to the radio Select the band (FM1, FM2, FM3 or AM). FM/AM You can select any one of FM1, FM2, and FM3 to listen to an FM station. FM1 FM2 FM3 AM Audio or volume level indicator 2 selected band appears To search stations Start searching a station. of higher When a station is received, searching stops. frequencies. To search stations of lower frequencies. To stop searching before a station is received, press the same button you have pressed for searching.
ENGLISH Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3). 1 FM1 FM/AM FM2 FM3 AM Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into.
ENGLISH Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 1 1 3 Select the FM1 band. FM/AM 2 Tune into a station of 88.3 MHz. See page 5 to tune into a station. 3 Press and hold the button for more than 2 seconds. “P1” flashes for a few seconds. 4 Repeat the above procedure to store other stations into other preset numbers.
ENGLISH Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. 2 1 Select the band (FM1, FM2, FM3 or AM) you want. FM/AM FM1 1 FM2 FM3 AM 2 Select the number (1 – 6) for the preset station you want. 8 EN05-09.
ENGLISH Other convenient tuner functions MO/RND Control dial SEL ¢ 4 SCAN Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted. If you want to listen to that program, press the same button again to stop scanning.
ENGLISH CD OPERATIONS Playing a CD 0 1 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. • When a CD is inserted upside down, “EJECT” appears on the display and the CD automatically ejects. A A Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically.
¢ 4 ENGLISH Locating a track or a particular portion on a CD Number buttons To fast forward or reverse the track ¢, while playing a CD, to fast forward the track. Press and hold Press and hold 4 , while playing a CD, to reverse the track. To go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back.
ENGLISH Selecting CD playback modes MO/RND RPT To play back tracks at random (Random Play) You can play back all tracks on the CD at random. MO/RND Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode turns on and off alternatively. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly.
SOUND ADJUSTMENTS ENGLISH Adjusting the sound You can adjust the treble/bass sound and the speaker balance. 2 Equalization pattern indicator 1 1 Select the item you want to adjust. Indication To do: Range BAS (Bass) Adjust the bass –6 (min.) — +6 (max.) TRE (Treble) Adjust the treble –6 (min.) — +6 (max.
ENGLISH Turning on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce well-balanced sound at low volume level. Each time you press LOUD, the loudness function turns on and off alternatively. @A LOUD 14 EN13-18.
You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) ENGLISH Using the Sound Control Memory Selecting and storing the sound modes Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored each of the following sources — FM1, FM2, FM3, AM, CD, CD changer and external components.
ENGLISH Recalling the sound modes 1 1 Select the source while the “Link” indicator is lit on the display. CD FM/AM The “Link” indicator starts flashing, and the sound mode stored in memory for the selected source is recalled. CD-CH Equalization pattern of the selected sound mode appears. Notes: • You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 18.
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. LINK ON: Advanced SCM (different SCMs for different sources) LINK OFF: Conventional SCM (one SCM for all sources) ENGLISH Canceling Advanced SCM 3 1, 4 2 1 Press and hold SEL for more than 2 seconds.
ENGLISH Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustments in memory. 1, 4 3 2 1 2 SCM Call up the sound mode you want to adjust. See page 15 for details. Within 5 seconds 2 To adjust the bass or treble sound level Select “BAS” or “TRE.” To turn on or off the loudness function LOUD Each time you press LOUD, the loudness function turns on and off alternatively.
OTHER MAIN FUNCTIONS ENGLISH Setting the clock 1 Press and hold SEL for more than 2 seconds. “CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL”, “AREA” or “LINE IN*” appears on the display. * Displayed only when one of the following sources is selected — FM, AM and CD. 2 1. 2. Set the hour. 1. Select “CLOCK H” if not shown on the display. 2. Adjust the hour. 3 1. 2. Set the minute. 1. Select “CLOCK M.” 2. Adjust the minute. 4 Start the clock. 19 EN19-22.KD-SX650[J]/f 19 99.10.
ENGLISH To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
You can select the level display according to your preference. When shipped from the factory, “AUDIO 2” is selected. AUDIO1: Shows the audio level indicator and the equalization pattern indicator. AUDIO2: Alternates “AUDIO 1” setting and illumination display. OFF: Erases the audio level indicator and the equalization pattern indicator. ENGLISH Selecting the level display Equalization pattern indicator Level indicator 1 Press and hold SEL for more than 2 seconds.
ENGLISH Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 2 3 How to attach the control panel 1 Unlock the control panel. Lift and pull the control panel out of the unit.
REMOTE OPERATIONS ENGLISH Remote sensor Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing the batteries R03(UM-4)/AAA(24F) Insert the · ends first. When the controllable range or effectiveness of the remote controller decreases, replace the batteries – R03(UM-4)/ AAA(24F).
ENGLISH CD CHANGER OPERATIONS We recommend that you use one of the CH-X series with your unit. If you have another CD automatic changer, consult your JVC car audio dealer for connections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KSU15K) for connecting it to this unit. Before operating your CD automatic changer: • Refer also to the Instructions supplied with your CD changer.
Press and hold ¢ , while playing a CD, to fast forward the track. Press and hold 4 ENGLISH To fast forward or reverse the track , while playing a CD, to reverse the track. To go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back. briefly, while playing a CD, to go back to the beginning of the Press 4 current track.
ENGLISH Selecting CD playback modes MO/RND RPT To play back tracks at random (Random Play) MO/RND Mode Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode changes as follows: RND1 RND2 (Random1) (Random2) RND Indicator Canceled Plays at random RND1 Lights All tracks of the current disc, then the tracks of the next disc, and so on. RND2 Flashes All tracks of all discs inserted in the magazine.
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied). ENGLISH EXTERNAL COMPONENT OPERATIONS 3 Preparations: • For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume). • Before operating the external component using the following procedure, select the external input correctly. (See “Selecting the external component to use” on page 28.
ENGLISH Selecting the external component to use You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied). To use the external component as the playback source through this receiver, you need to select which device — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.
MAINTENANCE ENGLISH Handling CDs COMPACT This unit has been designed only to reproduce the CDs bearing the Other discs cannot be played back. mark. DIGITAL AUDIO How to handle CDs When removing a CD from its case, press down the center holder of the case and lift the CD out, holding it by the edges. • Always hold the CD by the edges. Do not touch its recording surface. When storing a CD into its case, gently insert the CD around the center holder (with the printed surface facing up).
ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Causes Symptoms Remedies • CD cannot be played back. CD is inserted upside down. Insert the CD correctly. • CD sound is sometimes interrupted. You are driving on rough roads. Stop CD play while driving rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. The volume is turned to the minimum level.
AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel Continuous Power Output (RMS): Front: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion. Rear: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvcservice.com We can help you! VICTOR COMPANY OF JAPAN, LIMITED EN, SP, FR V J EN00.KD-SX650[J]/f 2 C 0999HISFLEJES 99.10.