Owner's Manual
Table Of Contents
ENGLISH
17
The following operations may differ or be unavailable depending on the connected
phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the volume
knob.
Press J / K / H / I.
Reject a call
Press and hold
or the
volume knob.
Press and hold
J / K / H / I.
End a call
Press and hold
or the
volume knob.
Press and hold
J / K / H / I.
While talking on the first incoming call...
Answer another incoming
call and hold the current call
Press
or the volume
knob.
( Not available )
Reject another incoming call
Press and hold
or the
volume knob.
( Not available )
While having two active calls...
End current call and activate
held call
Press and hold
or the
volume knob.
Press and hold
J / K / H / I.
Swap between the current
call and held call
Press
.
( Not available )
Adjust the phone volume*1
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob
during a call.
Press VOL +*2 or
VOL – during a call.
Switch between hands-free
and private talk modes*3
Press
during a call.
( Not available )
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL + to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1 Press and hold .
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[MIC GAIN] [LEVEL –10] to [LEVEL +10] ([LEVEL –04]): The sensitivity of
the microphone increases as the number increases.
[NR LEVEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the noise
reduction level until the least noise is being heard during a
phone conversation.
[ECHO CANCEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the echo
cancellation delay time until the least echo is being heard during
a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (page 18), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
.
BLUETOOTH®
JS_JVC_KD_T905BTS_K_EN_08.indd 17 6/4/2018 11:36:00 AM