Owner's Manual

ENGLISH

[F/W UPDATE]

[UPDATE SYSTEM]

[F/W UP

xxxx]

[YES]: Starts upgrading the firmware. ;

[NO]: Cancels (upgrading is not activated).

For details on how to update the firmware, visit

<http://www.jvc.net/cs/car/>.

[FACTORY

RESET]

[YES]: Resets the settings to default (except the

stored station). ; [NO]: Cancels.

[CLOCK]

[TIME SYNC]

[ON]: The clock time is automatically set using

the Clock Time (CT) data in FM Radio Broadcast

Data System signal. ; [OFF]: Cancels.

[CLOCK

DISPLAY]

[ON]: The clock time is shown on the

display even when the unit is turned off. ;

[OFF]: Cancels.

[ENGLISH]

Select the display language for menu and music

information if applicable.

By default, [ENGLISH] is selected.

[ESPANOL]

RADIO

• “ST” or “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Search for a station

Press B SRC repeatedly to select FM or AM.

2 Press S / T (or press H / I on the remote control) to search for a station automatically.

(or)

Press and hold S / T (or press and hold H / I on the remote control) until “M” flashes,

then press repeatedly to search for a station manually.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM.

Store a station

While listening to a station...

Press and hold one of the number buttons (1 to 6).

(or)

1 Press and hold the volume knob until “PRESETMODE” flashes.

2 Turn the volume knob to select a preset number, then press the knob.

“MEMORY” appears once the station is stored.

GETTING STARTED

JS_JVC_KD_T905BTS_K_EN_08.indd 5 6/4/2018 11:35:53 AM