Owner's Manual

32
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
References
Maintenance
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector gently
with a cotton swab. Be careful not to damage the
connector.
Handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing a disc from this unit, pull it out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
More information
For: – Latest firmware updates and latest compatible item list
– JVC original application
– Any other latest information
Visit <https://www.jvc.net/cs/car/>.
General
• This unit can only play the following CDs:
Connector (on the reverse
side of the faceplate)
Learning Steering Remote Control (for KD-T721BT)
6 Press and hold any control keys on your steering remote control
which you want to assign.
A list of key functions will appear on the display.
[NONE] (default)/ [MUTE] / [SEEKUP] / [SEEKDOWN] / [VOLUP] / [VOLDOWN] / [MODE] /
[ONHOOK] / [OFFHOOK] / [VOICE] / [ENTER]
7 Turn the volume knob to select a function to assign, then press the
knob.
The selected key function is assigned to the steering remote control key
you have selected in step 6.
The display returns to the key list as on step 4.
• K## (Function) : When certain function has been assigned to a key.
8 Repeat step 5 to step 7 to assign other control keys.
9 Press to exit.
Reassign the control keys
1
Press and hold .
2 Turn the volume knob to select [SYSTEM] , then press the knob.
3 Turn the volume knob to select [USER S.REMO] , then press the knob.
4 Turn the volume knob to select [RESET KEY] , then press the knob.
5 Turn the volume knob to select [YES] , then press the knob.
All the control keys will be reset.
Selecting [NO] will cancel the operation.
When
[FACTORY RESET] is set to [YES] (page6), it will also reset the learning
steering remote control.
To return to the previous setting item, press .
KD_T92MBS_K_B5A-3834-00_EN_5th Draft.indd 32KD_T92MBS_K_B5A-3834-00_EN_5th Draft.indd 32 2/7/2021 1:52:36 PM2/7/2021 1:52:36 PM