Owner's Manual
Table Of Contents
- Instruction Manual
- Software License Agreement
- Important Notice concerning the Software
- Contents
- Before Use
- Basics
- Getting Started
- HD Radio™ Tuner (for KD-X470BHS)
- Radio (for KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT)
- USB/iPod
- AUX
- Pandora®
- Spotify
- SiriusXM® Radio (for KD-X470BHS/KD-X370BTS/KD-X37MBS)
- Using Other Applications
- Bluetooth®
- AMAZON ALEXA (for KD-X470BHS/KD-X370BTS/KD-X37MBS)
- Audio Settings
- Display Settings
- References
- Troubleshooting
- Installation/Connection
- Specifications
- Quick Start Guide
- When it is not required to detach the front control panel from the main unit, use the provided screw to attach the control panel to the main unit.
- Warranty
ENGLISH
23
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL + to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[MIC GAIN] [LEVEL –10] to [LEVEL +10] ([LEVEL –04]): The sensitivity of the
microphone increases as the number increases.
[NR LEVEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
[ECHO CANCEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
.
Bluetooth®
Default: [XX]
[SETTINGS]
[AUTO ANSWER]
[01SEC] to [30SEC]: Answers an incoming call automatically in the selected
time (in seconds). ; [OFF]: Cancels.
[RING COLOR]
KD-X470BHS/KD-X370BTS/KD-X37MBS:
[COLOR01] to [COLOR49] ([COLOR08]): Selects the illumination color for
the buttons as notification when there is an incoming call and during a call. ;
[OFF]: Cancels.
[RING ILLUMI]
KD-X270BT/KD-SX26BT:
[BLINK01] to [BLINK05] ([BLINK02]): Selects the blinking pattern for the
buttons as notification when there is an incoming call. ; [OFF]: Cancels.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to
the other phone.
“(Second device name)” appears.
2 Turn the volume knob to select an item (page24), then press the
knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press
.
JS_JVC_KD_X470BHS_K_EN_1.indd 23JS_JVC_KD_X470BHS_K_EN_1.indd 23 5/28/2019 1:34:18 PM5/28/2019 1:34:18 PM