User Manual
4
Basics
Faceplate
Volume knob Display window*1
Detach button
Auxiliary
input jack
USB input
terminal
Attach Detach How to reset
Reset the unit
within 5seconds
after detaching
the faceplate.
To On the faceplate
Turn on the power
Press B SRC.
• Press and hold to turn off the
power.
Adjust the volume Turn the volume knob.
Select a source
Press B SRC repeatedly.
Change the display information*2 Press
repeatedly.
*1 Only for illustration purpose.
*2 One of the display information supports Music Synchronization Effect. The brightness level of the buttons
changes and synchronizes with the music level.
Before Use
IMPORTANT
• To ensure proper use, please read through this Guide before using this
product. It is especially important that you read and observe Warnings and
Cautions in this Guide.
• Please keep the Guide in a safe and accessible place for future reference.
WARNING
Do not operate any function that takes your attention away from safe
driving.
CAUTION
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent
accidents.
• Lower the volume before playing digital sources to avoid damaging the
speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside
the unit to prevent a short circuit.