ENGLISH DEUTSCH CASSETTE RECEIVER KS-F100 /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD NEDERLANDS FRANÇAIS CASSETTEN-RECEIVER RADIOCASSETTE RADIO/CASSETTESPELER SEL SCAN 1 2 3 4 5 6 EX AM DISP FM For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch. Pour l’installation et les raccordements, se référer au manuel séparé.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS .................................................... 3 RADIO OPERATIONS ................................................... 4 Listening to the radio ..................................................................... 4 Storing stations in memory ...........................................
BASIC OPERATIONS 1 /I ATT ENGLISH 2 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL SCAN 1 2 3 4 5 6 3 1 EX AM DISP FM Note: When you use this unit for the first time, set the built-in clock correctly, see page 13. 2 Turn on the power. /I ATT Notes on One-Touch Operation: • When you select tuner as a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
RADIO OPERATIONS Listening to the radio 1 /I ATT 35WX4 DETACHABLE CONTROL PANEL KS-F100 PROG MO SOUND LOUD SEL SCAN 1 2 3 4 5 6 3 1 /I ATT EX AM DISP FM 2 Turn on the power. Note on One-Touch Operation: When you select a band in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 AM AM FM FM1 FM2 FM3 Select the band (FM1, FM2, FM3 or AM). You can select any one of FM1, FM2, and FM3 to listen to an FM station.
ENGLISH Storing stations in memory You can store the broadcasting stations in memory. Storing stations manually You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL DISP SCAN 1 3 4 5 6 EX AM 3 2 1 2 FM 1 Select the FM1 band. FM LOUD 2 POP SOFT BEAT POP SOFT BEAT Tune into a station of 88.3 MHz.
Storing your favorite stations into the one-touch operation button (EX — extra) You can preset an FM or AM station (such as your favorite station or traffic announcement station); and recall it by one touch operation even if the unit is turned off. EXAMPLE: Storing an FM station of 88.3 MHz into the one-touch operation button (EX) /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL SCAN 1 2 3 4 5 6 1 1 EX 2 AM DISP FM 1 Follow the steps 1 and 2 on page 5.
ENGLISH Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 5 and 6. /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL SCAN 1 2 3 4 5 6 EX 2 1 AM EX AM DISP FM 1 FM FM1 FM2 FM3 AM Select the band (FM1, FM2, FM3 or AM) you want. 2 1 2 3 4 5 6 Select the number (1 – 6) for the preset station you want.
Other convenient tuner functions MO /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL SCAN 1 2 3 4 5 6 EX AM DISP FM SCAN Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcast.
TAPE OPERATIONS 2 1 /I ATT ENGLISH Listening to a tape 3 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL SCAN 1 1 /I ATT 2 3 4 5 6 EX AM DISP FM Turn on the power. 2 Insert a cassette. When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) 3 Select the tape direction. PROG • Press the both buttons at the same time. Each time you press the button, the tape direction changes ) and reverse ( ).
SOUND ADJUSTMENTS Turning on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels. Each time you press LOUD, the loudness function turns on/off alternatively. LOUD LOUD Selecting preset sound modes You can select a preset sound adjustment suitable to the music genre. Each time you press SOUND, the sound mode changes as follows.
ENGLISH Adjusting the sound You can adjust the treble/bass sound and the speaker balance. /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL SCAN 1 1 1 3 4 5 6 EX AM DISP FM 2 SEL Indication 2 Select the item you want to adjust. To do: Range BAS (bass) Adjust the bass –6 (min.) — +6 (max.) TRE (treble) Adjust the treble –6 (min.) — +6 (max.
Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 10) to your preference and store your own adjustments in memory. 1, 4 /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND LOUD SEL SCAN 1 2 3 4 5 6 EX AM FM 2 3 1 DISP 2 SOUND Call up the sound mode you want to adjust. See page 10 for details. Within 5 seconds 2 To adjust the bass or treble sound level SEL Select “BAS” or “TRE.
Setting the clock /I ATT 35WX4 DETACHABLE CONTROL PANEL PROG KS-F100 MO SOUND ENGLISH OTHER MAIN FUNCTIONS LOUD SEL SCAN 1 2 3 4 5 6 EX AM 1 2, 3 1 DISP FM 4 Press and hold the button for more than 2 seconds. SEL “CLOCK H” or “CLOCK M” appears on the display. 2 1. Set the hour. 1. Select “CLOCK H” if not shown on the display. 2. 2. Adjust the hour. 3 1. Set the minute. 1. Select “CLOCK M.” 2. 2. Adjust the minute. 4 DISP Start the clock.
Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 2 How to attach the control panel 1 Unlock the control panel. Lift and pull the control panel out of the unit.
To extend the lifetime of the unit This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below. ENGLISH MAINTENANCE To clean the heads • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: – Sound quality is reduced. – Sound level decreases. – Sound drops out. • Do not play dirty or dusty tapes.
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • A cassette tape cannot be inserted. You have tried to insert a cassette in the wrong way. • Cassette tapes become hot. This is not a malfunction. • Tape sound is at very low level and sound quality is degraded. The tape head is dirty. Clean it with a head cleaning tape. • Sound is sometimes interrupted. Connections are not good.
AUDIO AMPLIFIER SECTION CASSETTE DECK SECTION Maximum Power Output: Front: 35 watts per channel Rear: 35 watts per channel Continuous Power Output (RMS): Front: 15 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion. Rear: 15 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion.