Operation Manual
50
ENGLISH
Using the Bluetooth® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA200 (not supplied) to the CD
changer jack on the rear of this unit.
• Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function.
To use a Bluetooth device through the unit (“
Bluetooth PHONE
” and “
Bluetooth AUDIO
”) for the first time,
you need to establish Bluetooth wireless connection between the unit and the device.
• Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be
registered in total.
• Only one device can be connected at a time for each source (“
Bluetooth PHONE
” and “
Bluetooth AUDIO
”).
Connecting a new Bluetooth device
Registration (Pairing) methods
Use either of the following items in <Bluetooth> menu to register and establish the connection with a device.
• Select “
Bluetooth PHONE
” or “
Bluetooth AUDIO
” as the source to operate <Bluetooth> menu.
Open Make the unit ready to establish a new Bluetooth connection. The connection is established by
operating the Bluetooth device.
Search Make the unit ready to establish a new Bluetooth connection. The connection is established by
operating this unit.
• To register a device using <Open> or <Search>,
36.
• To connect a special device, 37.
• To connect/disconnect/delete a device, 37.
Changing the display information
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English website only).
( 66)
EN50-59_KW-AVX72DT_001A_2.indd 50EN50-59_KW-AVX72DT_001A_2.indd 50 5/5/09 10:35:19 AM5/5/09 10:35:19 AM