Instruction Manual (Europe)

Tuner
20
Trac Information (FM only)
You can listen and watch the traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio Broadcast
Data System that includes the TI information.
1
Touch [ ] on the left side of the screen.
Touch [TI].
 Traffic information mode is set.
Ñ When the trac bulletin starts
The Traffic Information screen appears
automatically.
Tuner Setup (FM only)
You can set tuner related parameters.
1
Touch [ ] on the left side of the screen.
Touch [SETUP].
 Tuner SETUP screen appears.
2
Set each item as follows.
■ [AF]
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON”.
■ [Regional]
Sets whether to switch to the station only in
the specific region using the “AF” control.
Default is “ON”.
■ [RDS CT]
Synchronizing the Radio Data System station
time data and this unit’s clock.
“ON” (Default), “OFF”
!B5H-0357-06_JVC_KWM_E_En.indb 20 2020/08/21 13:43