Owner's Manual
Table Of Contents
- Instruction Manual
- Quick Start Guide
- About the Quick start guide
- How to read this manual
- Precautions
- Initial Settings
- Adjusting the volume
- Functions of the Buttons on the Front Panel
- Turning on the Unit
- Source control screen descriptions
- Playing a disc (KW-V850BT/ KW-V85BT)
- Connecting a USB device
- Connect iPod/iPhone
- DVD/ VCD Basic Operation (KW-V850BT/ KW-V85BT)
- Tuner Basic Operation
- Music CD/ Disc media/USB Basic Operation
- iPod/iPhone Basic Operation
- Bluetooth Setup
- Using the Hands-Free Unit
- Before Installation
- Installing the unit
- About this Unit
Controlling Audio
76
Controlling General Audio
1
Press the [FNC] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Fader / Balance].
4
Set each parameter as follows.
■ [Fader / Balance]
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
■ [Center]
Clear the adjustment.
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1
Press the [FNC] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [EQ / SW Level].
4
Touch the screen and set the Graphic
Equalizer as desired.
■ Gain level (area in dotted frame)
Adjust the gain level by touching each
frequency bar.
You can select a frequency bar and adjust its
level by [R], [S].
■ [Preset Select]
Display the screen for selecting the preset
equalizer curve. (P.77)
■ [Memory]
Saves the adjusted equalizer curve as “User1”
to “User4”. (P.77)
■ [Initialize]
Initialize (flatten) the current EQ curve.
■ [ALL SRC]
Apply the adjusted equalizer curve to all
sources. Touch [ALL SRC] and then touch
[OK] on the confirmation screen.
■ [Bass EXT] (Bass Extend Settings)
When turned on, the frequencies lower than
62.5 Hz is set to the same gain level (62.5 Hz).