Owner's Manual
Table Of Contents
- Instruction Manual
Controlling Audio
76
■ [SW Level]
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
“None”. See Speaker/ X’over setup (P.73).
Ñ Recall the EQ curve
1
Touch [Preset Select].
2
Select an EQ curve.
NOTE
• [iPod] is available only for the iPod source.
Ñ Save the EQ curve
1
Adjust the EQ curve.
2
Touch [Memory].
3
Select where to save.
Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
Press the [FNC] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Volume Offset].
4
Touch [+] or [−] to adjust the level.
■ [Initialize]
Returns to the initial settings.
NOTE
• If you have increased the volume first, then
reduce the volume using “Volume Offset”.
Switching the current source to another source
suddenly may output extremely loud sound.
!B5A-2487-00_18KWV_K_En.indb 76 2018/02/20 18:49