Instruction Manual

ENGLISH

SD/USB operations

USB

• Do not connect 2 or more USB hubs to the USB cable of the unit.

HUB

USB

HUB

USB

HUB

• If you connect a USB device with large consumption current to the USB hub, it may not operate. In this case,

connect the device directly to the USB cable.

• When connecting via a USB hub, connect the USB hub to the USB cable first, then connect the USB device to

the USB hub.

• Avoid using the USB device if it might hinder your safety driving.

•

Disconnect a USB device while playback is paused or another source is selected.

• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case,

disconnect the USB device. Turn off the unit, then turn on again.

• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or

cause damages to the device.

• You can connect USB devices and iPod/iPhone to the same USB hub.

• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.

• USB devices equipped with special functions such as data security functions cannot be used with the unit.

• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached

properly or the connection might be loose.

• This unit may be unable to play back some USB devices or some files due to their characteristics or recording

conditions.

• If you touch the front panel when closing from the fully-opened position, the safety mechanism is activated

and the panel will open again.

• If you turn off the unit with the front panel fully-opened, the panel remains open.

• If you insert a disc with the front panel fully-opened, the panel won’t close automatically.

Caution:

EN_KW-NT800HDT_NT700[J].indb 62EN_KW-NT800HDT_NT700[J].indb 62 1/27/2012 4:40:07 PM1/27/2012 4:40:07 PM