ENGLISH ESPAÑOL FRANÇAIS KW-R910BT CD RECEIVER INSTRUCTION MANUAL RECEPTOR CON CD MANUAL DE INSTRUCCIONES RÉCEPTEUR CD MANUEL D’INSTRUCTIONS Please read all instructions carefully before operation to obtain the best possible performance from the unit. Por favor lea detenidamente este manual para comprender a fondo todas las instrucciones y obtener un máximo disfrute de esta unidad.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Para cumplimiento de la COFETEL: “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada” IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s).
CONTENTS BEFORE USE BEFORE USE 2 BASICS 3 GETTING STARTED 4 CD / USB / iPod 5 RADIO 7 AUX 8 Pandora® 9 iHeartRadio® 10 BLUETOOTH® 11 AUDIO SETTINGS 16 DISPLAY SETTINGS 18 MORE INFORMATION 19 TROUBLESHOOTING 20 SPECIFICATIONS 22 INSTALLATION / CONNECTION 24 How to read this manual • Operations are explained mainly using buttons on the faceplate. • [XX] indicates the selected items. • ( XX) indicates references are available on the stated page.
BASICS Faceplate Remote control (RM-RK52) Loading slot Remote sensor (Do not expose to bright sunlight.) Display window How to reset Your preset adjustments will also be erased. Pull out the insulation sheet when using for the first time. How to replace the battery Volume knob (turn/press) To Do this (on the faceplate) Do this (on the remote control) Turn on the power Press B /SOURCE. • Press and hold to turn off the power. ( not available ) Adjust the volume Turn the volume knob.
GETTING STARTED 3 Set the basic settings 1 Press and hold MENU. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Press MENU to exit. To return to the previous setting item or hierarchy, press G PTY. Default: XX CLOCK CLOCK ADJ 1 1 2 3 4 CLOCK DISP Cancel the demonstration Press and hold MENU. Turn the volume knob to select [DEMO], then press the knob. Turn the volume knob to select [DEMO OFF], then press the knob. Press MENU to exit.
CD / USB / iPod Start playback The source changes automatically and playback starts. CD Eject disc Label side USB USB input terminal USB 2.0 cable*1 (commercially available) To Do this Select a track/file Press S/ T (or press H / I on RM-RK52). Select a folder *3 Press J / K (or press J / K on RM-RK52). Reverse/ Fast-forward Press and hold S/ T (or press and hold H / I on RM-RK52). Repeat play *4 Press 3 B repeatedly to make a selection.
CD / USB / iPod Select a track/file from a list For iPod: Applicable only when [HEAD MODE] is selected. ( 5) 1 Press MENU 2 Turn the volume knob to make a selection, then press the knob. • MP3/WMA/WAV file: Select the desired folder, then a file. • iPod or JPC / JMC file: Select the desired file from the list (PLAYLISTS, ARTISTS, ALBUMS, SONGS, PODCASTS*, GENRES, COMPOSERS*, AUDIOBOOKS*). * Only for iPod. If you have many files....
RADIO • To select a stored station: Press J / K or one of the number buttons (1 to 6). (or) Press MENU, then turn the volume knob to select a preset number and press the knob to confirm. Search for your favorite program (PTY Search) “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Search for a station 1 Press B /SOURCE to select FM or AM. 2 Press S/ T (or press H / I on RM-RK52) to search for a station automatically.
AUX RADIO Default: XX RADIO TIMER SSM Turns on the radio at a specific time regardless of the current source. 1 ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be turned on. 2 FM/ AM: Select the FM or AM band. 3 01 to 18 (for FM)/ 01 to 06 (for AM): Select the preset station. 4 Set the activation day * and time. • “M” lights up when complete. * Selectable only when [ONCE] or [WEEKLY] is selected in step 1. Radio Timer will not activate for the following cases. • The unit is turned off.
Pandora® Preparation: Install the latest version of the Pandora application onto your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA] in [SRC SELECT]. ( 4) Create a new station 1 Press MENU. 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist.
iHeartRadio® Preparation: Install the latest version of iHeart Link for JVC application onto your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART] in [SRC SELECT]. ( 4) Start listening 1 Open the iHeart Link application on your device. 2 Connect your device to the USB input terminal. USB input terminal To Do this Pause or resume playback Press the volume knob (or press on RM-RK52).
BLUETOOTH® You can operate Bluetooth devices using this unit. Connect the microphone Rear panel Microphone (supplied) Microphone input jack Pair a Bluetooth device When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device. Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. • Up to five devices can be registered (paired) in total.
BLUETOOTH® Bluetooth compatibility check mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device connected. 1 Press and hold . “BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW USING PHONE” “PIN IS 0000” scrolls on the display. 2 Search and select “JVC UNIT” on the Bluetooth device within 3 minutes. 3 Perform (A), (B) or (C) depending on what appears on the display.
BLUETOOTH® Default: XX MIC LEVEL NOISE RDCT ECHO CANCEL –20 — +08 (0): The sensitivity of the microphone increases as the number increased. –05 — –20 (–10): Adjust the noise reduction level until the least noise is being heard during a phone conversation. 1 — 10 (4): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. Bluetooth mode operations to enter Bluetooth mode.
BLUETOOTH® Use Voice Recognition . 1 Press and hold The connected phone (which has been paired the earliest) is activated. However, if priority device is connected, pressing and holding activate the priority device. ( 15, PRIORITY) 2 Speak the name of the contact you want to call or the voice command to control the phone functions. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.
BLUETOOTH® Default: XX PHONE AUDIO Selects the phone or audio device to connect or disconnect. “ ” appears in front of the device name. APPLICATION Shows the connected phone name using the JVC Smart Music Control *1 app. “ ” appears in front of the device name. DELETE PAIR 1 Turn the volume knob to select a device to delete, then press the knob. 2 Turn the volume knob to select [YES] or [NO], then press the knob. PRIORITY Selects a device to be connected as priority device.
AUDIO SETTINGS BLUETOOTH® Bluetooth audio player To Operations and display indications may differ according to their availability on the connected device. To Playback Select a preset equalizer Do this 1 Press B /SOURCE to select BT AUDIO. 2 Operate the Bluetooth audio player to start playback. Store your own sound settings Default: 00 Do this Press EQ repeatedly. (or) Press EQ, then turn the volume knob within 2 seconds.
AUDIO SETTINGS Default: XX SUB.W LPF *1 THROUGH: All signals are sent to the subwoofer. ; LOW 55Hz / MID 85Hz / HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. FADER*3 *4 R06 — F06 (00): Adjusts the front and rear speaker output balance. BALANCE *3 L06 — R06 (00): Adjusts the left and right speaker output balance. VOL ADJUST –05 — +05 (00): Presets the volume adjustment level of each source (compared to the FM volume level).
DISPLAY SETTINGS Default: XX COLOR PRESET You can select a color for [ALL ZONE], [ZONE 1], [DISP ZONE], or [ZONE 2] separately. For [ALL ZONE], you can also select a color pattern. Default color: ALL ZONE: [COLOR 06], ZONE 1: [COLOR 06], DISP ZONE: [COLOR 01], ZONE 2: [COLOR 27] 1 Select a zone for setting. ( Illustration on the left column) 2 Select a color for the selected zone. • COLOR 01 to COLOR 29 • USER: The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown.
MORE INFORMATION About discs and audio files About USB devices About Pandora • This unit can only play the following CDs: • This unit can play MP3/WMA/WAV files stored on a USB mass storage class device. • You cannot connect a USB device via a USB hub. • Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
TROUBLESHOOTING MORE INFORMATION About JVC Playlist Creator and JVC Music Control • This unit supports the PC application JVC Playlist Creator and AndroidTM application JVC Music Control. • When you play audio file with song data added using the JVC Playlist Creator or JVC Music Control, you can search for audio file by Genres, Artists, Albums, Playlists, and Songs. • JVC Playlist Creator and JVC Music Control are available from the following web site: .
TROUBLESHOOTING Symptom Remedy Symptom Remedy “UPDATE APP” Make sure you have installed the latest version of the iHeart Link for JVC application on your device. The iPod/iPhone does not turn on or does not work. • Check the connection between this unit and iPod/ iPhone. • Detach and reset the iPod/iPhone using hard reset. “PLS LOGIN” You haven’t log in. Log in again. “STATION NOT AVAILABLE” Broadcast from the station is over. “STATION NOT SELECTED” No station is selected.
SPECIFICATIONS TROUBLESHOOTING Bluetooth® The connected phone does not support Voice Recognition feature. “ERROR” appears. Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried. The unit does not respond when you try to copy the phonebook to the unit. You may have tried to copy the same entries (as stored) to the unit. Press DISP or G PTY to exit. Sound is being interrupted or skipped during playback of a Bluetooth audio player.
Bluetooth USB 1.1, USB 2.0 (Full speed) Maximum Output Power 50 W × 4 Compatible Devices Mass storage class 22 W × 4 File System FAT12/ 16/ 32 Full Bandwidth Power (at less than 1% THD) Maximum Supply Current DC 5 V Speaker Impedance 4Ω—8Ω MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 Preout Level/Load (CD) 2 500 mV/10 kΩ load (full scale) WMA Decode Compliant with Windows Media Audio Preout Impedance ≤ 600 Ω WAV Decode Linear-PCM Operating Voltage 14.4 V (10.
INSTALLATION / CONNECTION Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • Insulate unconnected wires with vinyl tape to prevent a short circuit. • Be sure to ground this unit to the car’s chassis again after installation.
Wiring connection Signal cord (not supplied) Front output JVC Amplifier Rear/subwoofer output Fuse (10 A) Vehicle dashboard Factory wiring harness (vehicle) Antenna terminal To the steering wheel remote control adapter Recommended connection Blue: To power antenna Blue/white: To amplifier Vehicle-specific Wiring Harness (separately purchased) Microphone input jack ( 11) Remote wire (not supplied) Light blue/yellow STEERING WHEEL REMOTE Join the same color wires together.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
CAUTION 1.\ ~ w 0::: 0 LL w INCORRECT CONNECTION CAUSES SERIOUS DAMAGE TO THIS UNIT PLEASE READ INSTALLATION/CONNECTION MANUAL CAREFULLY. c U) W w !z m
JVC AMERICAS CORP. U.S.A. TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FR EE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase fo r the period shown below. ("The Warranty Period") .
CANADA .JVC JVC CANADA INC. GARANTIE WARRANTY Warranty applies only to PRODUCT distributed in Canada by JVC Canada Inc. JVC CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer. JVC warrants that this JVC product is free, under normal use and maintenance, from any defects in material and workmanship subject to the following terms and conditions: 1. To Obtain Warranty Service: 3.