Owner's Manual
Table Of Contents
4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Basics (on faceplate)
KW-X840BTS:
Volume knob
Eject button and loading slot
USB input terminal
Display window*1
Auxiliary input jack
To On the faceplate
Turn on the power
Press SOURCE B.
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
Select a source
Press SOURCE B repeatedly.
Change the display information*2 Press
MENU repeatedly.
*2 One of the display information supports Music Synchronization Effect. The illumination color or brightness level of
the buttons changes and synchronizes with the music level.
Before Use
IMPORTANT
• To ensure proper use, please read through this Guide before using
this product. It is especially important that you read and observe
Warnings and Cautions in this Guide.
• Please keep the Guide in a safe and accessible place for future
reference.
WARNING
Do not operate any function that takes your attention away from safe
driving.
CAUTION
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to
prevent accidents.
• Lower the volume before playing digital sources to avoid
damaging the speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal
tools) inside the unit to prevent a short circuit.
• For KW-R940BTS: If a disc error occurs due to condensation on the
laser lens, eject the disc and wait for the moisture to evaporate.
• Depending on the types of cars, the antenna will automatically
extend when you turn on the unit with the antenna control wire
connected. Turn off the unit when parking at a low ceiling area.
*1 Only for illustration purpose.
How to reset
JS_JVC_QSG_KW_R940BTS_K_EN_3.indd 4JS_JVC_QSG_KW_R940BTS_K_EN_3.indd 4 8/8/2019 2:07:03 PM8/8/2019 2:07:03 PM