Operation Manual

Installation and ConnectionInstallation and Connection
Installing the unit
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
Installing the trim plate
Removing the unit
1 Engage the catch pins on the extraction
keys (
]) and remove the two locks on the
lower part of the trim plate (
“).
2 Remove from the upper two catches of
the trim plate (
“).
The frame can be removed from the top side in the
same manner.
3 Insert the two extraction keys (]), then
pulling them as illustrated.
Be careful to avoid injury from the catch pins on
the extraction key.
Connecting external components
1 Microphone input (MIC) (Page 41)
2 Audio video input (AV-IN)
Connect the following type of 4-pole mini plug:
1 Left audio
2 Right audio
3 Ground
4 Composite video
3 Video output (V-OUT)
4 Rear view camera input (R-CAM)
5 Output terminals*
• Left output (White)
• Right output (Red)
REAR: Rear speaker preouts
FRONT: Front speaker preouts
SW: Subwoofer preouts
For 3-way crossover:
REAR: Tweeter preouts
FRONT: Mid range speaker preouts
SW: Woofer preouts
* When connecting an external amplifier, connect its ground wire
to the chassis of the car; otherwise the unit may be damaged.
Lock
Catch
40
ENGLISH
00_KW-V2018ST_E_EN.indb 4000_KW-V2018ST_E_EN.indb 40 13/6/2017 10:56:26 AM13/6/2017 10:56:26 AM