Operation Manual

48
Pin Color and functions of Connector A and B
A4 Yellow Battery
A5 Blue with white stripe Power control
A6 Orange with white stripe Dimmer
A7 Red Ignition (ACC)
A8 Black Ground connection
B1 Purple
Right speaker ª (rear)
B2 Purple with black stripe
Right speaker · (rear)
B3 Gray
Right speaker ª (front)
B4 Gray with black stripe
Right speaker · (front)
B5 White
Left speaker ª (front)
B6 White with black stripe
Left speaker · (front)
B7 Green
Left speaker ª (rear)
B8 Green with black stripe
Left speaker · (rear)
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Vehicle
Red (A7)
Yellow (A4)
Default wiring
Connecting the ISO
connectors
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
CONNECTION/INSTALLATIONCONNECTION/INSTALLATION
Connection
R Connecting wires to terminals
See page 49.
See page49.*
4
USB terminal (0.8 m): See page49.*
1
10 A fuse
Connect to the vehicle’s reverse
lamp harness when using the
optional rear view camera.
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
To the OE remote adapter matching your car
• If no connections are made, do not let the cable come out from the tab.
Purple with white stripe
(Reverse sensor wire)
Light green (Parking sensor wire)
Light blue with yellow stripe (Steering remote control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
*
1
Only for KW-V41BT.
*
2
Only for KW-V215DBT.
*
3
For KW-V41BT/KW-V21BT/KW-V11: The appearance of the aerial terminal
is different from the illustration.
*
4
Only for KW-V41BT/KW-V215DBT/KW-V21BT.
Connector A
Connector B
Connect the aerial cord to the aerial
terminal.*
3
*
2
3
1
KW-V_Entry_E.indb 48KW-V_Entry_E.indb 48 2014/09/09 11:332014/09/09 11:33