ENGLISH ESPAÑOL FRANÇAIS KW-V41BT/KW-V21BT/KW-V11 MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL MONITOR CON RECEPTOR DE DVD MANUAL DE INSTRUCCIONES MONITEUR AVEC RÉCEPTEUR DVD MODE D’EMPLOI This instruction manual is used to describe models listed below. t 3FHJPO %7% 3FHJPO $PEF BSFB 3FHJPO %7% 3FHJPO $PEF area) En este manual de instrucciones se describen los modelos listados a continuación.
CONTENTS BEFORE USE BEFORE USE............................................................ 2 How to reset your unit.................................................... 3 BLUETOOTH (Only for KW-V41BT/KW-V21BT) ........................ 30 INITIAL SETTINGS .................................................. 4 SETTINGS .............................................................. 38 Sound adjustment .........................................................38 Adjustment for video playback...................
BEFORE USE For KW-V41BT Region 1/KW-V21BT Region 1/ KW-V11 Region 1: V CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, the following are reproductions of labels on, or inside the product relating to laser product safety.
INITIAL SETTINGS Initial setup When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also change the settings on the screen. (Page 44) 1 *1 (Page 7) (Page 45) (Page 45) *1 (Page 41) KW-V41BT *2 (Page 41) KW-V21BT/KW-V11 Adjust the panel angle. Select an external component connected to the iPod/AV-IN terminal to play. Select [ON] when connecting the rear view camera.
INITIAL SETTINGS 4 Set the clock time. BASICS Component names and functions V Caution on the volume setting: Digital devices produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level. FM RBDS. Sets the clock manually. (See below.) KW-V41BT When selecting : Adjust the hour (1), then adjust the minute (2).
BASICS 8 KW-V21BT/KW-V11 KW-V21BT KW-V11 1 Reset button Resets the unit. (Page 3) 2 Loading slot 3 M (Eject) button Ejects the disc. (Press) (Page 10) 4 Volume +/– button Adjusts the audio volume. (Page 7) 5 USB input terminal (Page 52) 6 Monitor panel 7 Screen (touch panel) 6 button • Switches the screen. (Press) – The screen switched to depends on the setting (Page 45). • Turns off the screen. (Hold) (Page 7) • Turns on the screen.
BASICS R Adjusting the volume R Turning on/off the AV source To adjust the volume (00 to 35) KW-V41BT KW-V21BT/ KW-V11 You can activate the AV function by selecting a source. On the Home screen: R Adjusting the panel angle (only for KW-V41BT) 1 Display the screen. On the Home screen: • Press [K] repeatedly to change the page on the menu screen. Press + to increase, and press – to decrease. • Holding the button increases/decreases the volume continuously.
BASICS Common screen operations R Common screen descriptions You can display other screens any time to change the source, show the information, or change the settings, etc. Home screen Displays the source control screen/settings screen and changes the picture source. • To display the Home screen, press HOME on the monitor panel. • You can arrange the items to display on the Home screen. (Page 42) Source control screen Performs source playback operations.
BASICS Selecting the playback source 1 Display the Home screen. KW-V41BT KW-V21BT/KW-V11 [Tuner] [SiriusXM]*1 [Disc] [USB] [iPod] [Pandora]*2 [BT Phone]*3 2 Display [All] screen, then select the source. [BT Audio]*3 [AV-IN]*4 [Apps]*5 [AV Off] [Camera] Switches to the radio broadcast. (Page 21) Switches to the SiriusXM® radio broadcast. (Page 24) Plays a disc. (Page 10) Plays files on a USB device. (Page 14) Plays an iPod/iPhone. (Page 15) Switches to the Pandora broadcast.
DISCS Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types/file types, see page 55. R Ejecting a disc KW-V41BT KW-V21BT/KW-V11 R Indications and buttons on the source control screen For video playback 1 2 3 4 5 6 R Inserting a disc Insert a disc with the label side facing up. KW-V41BT KW-V21BT/KW-V11 • When removing a disc, pull it horizontally.
DISCS Operation buttons • Available buttons on the screen and operations differ depending on the type of disc/file being played back. [Mode] [ [ ][ ][ [ ] ] ] [o] [IW] [S] [T] [Title [Title ] ] Changes the settings for disc playback on the or screen. (Page 13) Selects a folder. Selects playback mode. (Page 13) Displays the folder/track list. (See the far right column.) Stops playback. Starts/pauses playback. • Selects a chapter/track. (Press) • Reverse/forward search.
DISCS R Video menu operations You can display the video menu screen during video playback. • The operation buttons disappear when the screen is touched or when no operation is done for about 5 seconds. For video playback except VCD • Available buttons on the screen and operations differ depending on the type of disc/file being played back. Displays the picture size selecting screen. (Page 40) [Aspect] Selects the aspect ratio. (Page 40) [Pict Adjust] Displays the picture adjustment screen.
DISCS R Selecting playback mode [ [ ] Selects Random playback mode. ] Selects Repeat playback mode. • Available playback modes differ depending on the type of disc/file being played back. • You cannot activate the repeat mode and the random mode at the same time. • Each time you press the button, the playback mode changes. (The corresponding indicator lights up.) – Available items differ depending on the type of disc/file being played back. CHAP TITLE SONG FOLDER FOLDER ALL Repeats current chapter.
USB Connecting a USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit. • For details about connecting USB devices, see page 52. • You cannot connect a computer or portable HDD to the USB input terminal. • For playable file types and notes on using USB devices, see page 56. When a USB device is connected... The source changes to “USB” and playback starts. • All tracks in the USB device will be played repeatedly until you change the source.
iPod/iPhone USB R settings R Selecting a folder/track on the list Setting [Audio] Plays back audio files. [Still Image] Plays back picture files. [Video] Plays back video files. [Audio&Video] Plays back audio files and video (Initial) files. 1 • For playable files, see page 56. If the USB device contains no files of the selected type, the existing files are played in the following priority: audio, video, then still picture.
iPod/iPhone R Selecting preference settings for iPod/ iPhone playback 2 Display the setting screen. When the source is “iPod”... Playback operations When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 39. 1 2 R Indications and buttons on the source control screen 1 Select the speed of audio books. Shows/hides artwork of iPod.
iPod/iPhone Operation buttons [Mode] [ ] [ [ ] ] [IW] [S] [T] Changes the settings for iPod/iPhone playback on the screen. (Page 16) Selects random playback mode.*1 • ALL: Functions the same as Shuffle Songs. • ALBUM: Functions the same as Shuffle Albums. Selects repeat playback mode. • SONG: Functions the same as Repeat One. • ALL: Functions the same as Repeat All. Displays the audio/video file list. (See the right column.) Starts/pauses playback. • Selects an audio/video file.
APPs You can use Apps of the connected iPod touch/ iPhone on this unit. • You cannot use Apps with iPod touch (5th Generation)/iPhone 5S/iPhone 5C/iPhone 5. • For Apps you can use on this unit, visit . R Playback operations 1 Start the App on your iPod touch/iPhone. 2 Select “Apps” as the source. On the Home screen: Preparation 1 Connect iPod touch/iPhone using KS-U59. (Page 52) 2 Select [iPod] for .
Pandora® (Only for KW-V41BT Region 1/KW-V21BT Region 1/KW-V11 Region 1) You can stream Pandora from iPod touch/iPhone via a wired connection or from Android devices through Bluetooth. • Install the latest version of the Pandora application on your iPod touch/iPhone/Android. • Android devices can only be used with KW-V41BT Region 1/KW-V21BT Region 1. Preparation Connect the device, then start the Pandora application. For Android 1 Pair the Android device through Bluetooth.
Pandora® R Selecting a station from the list 1 Display the list selecting screen. 2 Select the list type. Selects from the station names (Station List). Selects from the genre names (Genre List). 3 Select a station from the list. On the Station List Plays all the songs in the registered stations randomly. [By Date] Sorts the list in reverse chronological order. [By Name] Sorts the list in alphabetical order.
TUNER Listening to the radio Preparation: Select the appropriate tuner channel interval for . (Page 22) R Indications and buttons on the source control screen 1 23456 7 8 Tuner reception information 1 Text information • Pressing [H] scrolls the text if not all of the text is shown. • Pressing [Radio Text] switches the information between Radio Text, Radio Text Plus, and PTY code.
TUNER R Tuning in FM stations only with strong signals—Local seek 1 R Changing the tuner channel interval R Storing stations in the memory 1 You can preset 6 stations for each band. Automaticp resetting—SSM (Strong-station Sequential Memory) (For FM only) 2 2 [ON] [OFF] Select this to tune in only to stations with sufficient signal strength. The LO indicator lights up. Deactivate the function.
TUNER R Selecting a preset station FM RBDS features R Searching for FM RBDS programs—PTY Search R Activating/deactivating TI Standby Reception You can search for your favorite programs being broadcast by selecting the PTY code for your favorite programs. 1 2 Select a PTY code. (Hold) • You can change the page to display more items by pressing [J]/[K]. PTY Search starts. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in.
SiriusXM® Satellite RADIO (Only for KW-V41BT Region 1/KW-V21BT Region 1) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. 3 When the following screen appears, press [Enter]. Activating subscription 1 Check your Radio ID.
SiriusXM® Satellite RADIO R Changing the display information R Selecting a preset channel 3 Select a channel. On the screen Select a band (1), and then select a preset channel (2). Selecting a channel The preset list containing the channel names is displayed. • Press [Text] again to display the text information for the station currently being received. R Selecting a channel on the list On the screen Select a category (1), and then select a channel (2).
SiriusXM® Satellite RADIO R Replaying content Replay You can pause, rewind and replay content from the currently tuned channel. • The SiriusXM Connect Vehicle Tuner continually buffers up to 60 minutes of audio. • If you change to another channel during playback, the Replay buffer content will be lost. R Indications on the source control screen 1 2 3 1 Playback status 2 Progress bar Shows the remaining capacity (black) and the amount of buffered content (gray).
SiriusXM® Satellite RADIO TuneScan™ You can check the buffered contents by scanning the first 6 seconds of the buffered contents of the preset channels and the currently tuned channel. The unit starts scanning. • To select the previous/next content, press [S] or [T]. • To finish scanning and continue playing contents, press [Scan]. • To exit scanning, press and hold [Scan]. 2 Enter a four-digit code (1), and then confirm (2).
SiriusXM® Satellite RADIO Selecting the channels to lock—Parental Lock Channel This parental control option allows you to pick the channels to be locked by the parental control feature. • When is set to [Mature] or [OFF], you cannot change the setting. 1 To deactivate the parental lock for all locked channels: Select [All Clear] for on the screen, then enter the parental code number.
OTHER EXTERNAL COMPONENTS Using external audio/video players—AV-IN R Starting playback 1 Connect an external component to the iPod/AV-IN terminal. When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 39. You can connect an external component to the iPod/AV-IN terminal. (Page 52) Preparation: Select [AV-IN] for . (Page 45) • can be changed only when is set to [OFF].
BLUETOOTH (Only for KW-V41BT/KW-V21BT) Information for using Bluetooth® devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as mobile phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communicate with each other. Notes • While driving, do not perform complicated operations such as dialing numbers, using the phonebook, etc. When you perform these operations, stop your car in a safe place.
BLUETOOTH Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0) 1 Display the screen. On the Home screen: • Press [K] repeatedly to change the page on the menu screen. 2 Change the PIN code. • If you skip changing the PIN code, go to step 3. • The PIN code is initially set to “0000”. • The maximum number of digits in the PIN code is 16. 4 Select “JVC KW-V” for your Bluetooth device. JVC KW-V • If the PIN code is required, enter “0000” (initial).
BLUETOOTH • When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed when the information is acquired from the device. R Connecting a registered Bluetooth device 1 Display the screen. (Page 31) R Receiving a call When a call comes in... To disconnect Select [TEL (HFP)], [Audio (A2DP)], or [PANDORA (SPP)]* to disconnect the Bluetooth device being used for that function on the screen (see the left column).
BLUETOOTH R Adjusting the volume of calls/earpiece/ microphone While talking... • You can adjust the volume level between –20 to +8 (initial: 0). • Use the monitor panel to adjust the call/earpiece volume. (Page 7) R Switching between handsfree mode and phone mode R Notification when SMS is received If the mobile phone is compatible with SMS (Short Message Service), the unit tells you a message has been received when is set to [ON].
BLUETOOTH From the phone book/call lists 1 • To use the A to Z search in the phone book: When the screen is displayed, you can search by initial. 1 [Outgoing] [Incoming] [Missed] [Phonebook] From the dialed call list From the received call list From the missed call list From the phone book • To copy the phone book, see page 35.
BLUETOOTH Voice dialing • Available only when the connected mobile phone has a voice recognition system. 1 Activate voice dialing. 3 1 Display the screen. (Page 33) 2 Select an item from the phone book/call lists. (Page 34) 3 Select a phone number. On the screen: On the monitor panel: KW-V41BT R Presetting phone numbers You can preset up to 6 phone numbers. KW-V21BT (Hold) 4 Select a preset number to store into.
BLUETOOTH About mobile phones compatible with Phone Book Access Profile (PBAP) If your mobile phone supports PBAP, you can display the phone book and call lists on the touch panel screen when the mobile phone is connected. • Phone book: up to 5 000 entries • Dialed calls, received calls, and missed calls: up to 50 entries each R Deleting the phone number entries in the unit 1 Display the phone book/call list you want to delete. (Page 33) 2 1 Display the screen.
BLUETOOTH R Setting items Shows the connected phone device name. • ON: The unit answers the incoming calls automatically. • OFF (Initial): The unit does not answer the calls automatically. Answer the calls manually. the arrival of a message by ringing and displaying “Receiving Message”. • OFF: The unit does not inform you of the arrival of a message. the unit is used.
SETTINGS Sound adjustment R Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV • You cannot adjust the sound when the AV source is turned off. Storing your own adjustment—Customizing preset sound mode 4 Adjust the sound. 1 Select a sound mode. (See the left column.
SETTINGS R Adjusting the crossover frequency 1 Display the screen. On the Home screen: Adjusts the crossover for the front/rear speakers (high pass filter). Adjusts the crossover for the subwoofer (low pass filter).*1 Adjusts the subwoofer level.*1 Selects the phase for the subwoofer.*2 Adjusts the crossover frequency. *1 Adjustable only when the subwoofer is activated. (Page 44) *2 Not selectable when is set to .
SETTINGS R Changing the aspect ratio * You can change the aspect ratio for video playback. For 16:9 original pictures 4:3 signal 16:9 signal 1 Display the adjustment menu. 2 Select the aspect ratio. For viewing 4:3 pictures naturally on the wide screen 4:3 signal 16:9 signal * For 4:3 original pictures 4:3 signal 16:9 signal For “DISC”/“USB” only: The aspect ratio is automatically selected to match the incoming signals.
SETTINGS To select a panel color*1 Changing display design R Storing your own scene for the background image 1 Display the screen. On the Home screen: 3 * • Selecting [Scan] changes the illumination color gradually. *1 Panel color is selectable only for KW-V41BT. *2 Store your own scene beforehand. (See the right column.) *3 Store your own color adjustment beforehand. (See below.
SETTINGS 5 Capture the image displayed on the screen. 2 Select where to place the icon (1), then select the item you want to display in the selected position (2). A confirmation message appears. Press [Yes] to store the newly captured image. (The existing image is replaced with the new one.) • Press [No] to return to the previous screen. 2 * Not displayed when playing an external component connected to the iPod/AV-IN input terminal. Repeat this step to place icons for other items.
SETTINGS R Updating the system 3 R Adjusting the touch position You can update the system by connecting a USB device containing an update file. • For system updates, visit . 1 Create an update file, copy it to a USB device, and connect it to the unit. • To connect a USB device, see page 52. 2 Display the screen. On the Home screen: • Press [K] repeatedly to change the page on the menu screen.
SETTINGS Setting menu items R Displaying the menu screen R
SETTINGS R setting screen • Auto (Initial): Dims the screen and button illumination when you turn on the headlights. – The ILLUMI lead connection is required. (Page 51) • ON: Activates dimmer. • OFF: Cancels. Change the display design. (Page 41) • ON: Displays the clock while a video source is played back. • OFF (Initial): Cancels. • ON (Initial): Activates the demonstration on the screen. • OFF: Cancels. • ON: Repeats scrolling.
SETTINGS R setting screen Select the text language used for on-screen information. • English (Initial)/Español/Français/Deutsch/ Italiano/Nederlands/Português/Türkçe/ Руccĸий/ / / / / / /Bahasa Malaysia/Bahasa Indonesia – “Please Power Off” appears when the setting is changed. Turn off the power, then turn on to enable the change. • GUI Language: Select a language used for displaying operation buttons and menu items.
REMOTEC ONTROLLER For KW-V21BT Region 1/KW-V11 Region 1: To use the remote controller, purchase RM-RK258 separately. R Changing the battery of the remote controller CR2025 (+side) • Use a commercially available button battery (CR2025). • Insert the battery with the + and – poles aligned properly. – If the effectiveness of the remote controller decreases, replace the battery. Preparation R Removing the battery sheet Pull the battery sheet out from the remote controller to activate the battery.
REMOTE CONTROLLER Operations using the remote controller (RM-RK258) R Basic button functions ATT DISP FM/J / AM/K / VOL +/ VOL – SRC I/W Attenuates/restores the sound. Switches the screen. • The screen switched to depends on the setting (Page 45). • Tuner/SiriusXM Satellite Radio *1: Selects the preset stations. • Selects a title/item/folder. • Tuner: – Searches for stations automatically. – Searches for stations manually. (Hold) • SiriusXM Satellite Radio*1 : – Selects a channel.
CONNECTION/INSTALLATION Before installing the unit V WARNING • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.
CONNECTION/INSTALLATION R Installation procedure 1 To prevent a short circuit, remove the key 2 3 4 5 6 7 8 9 from the ignition and disconnect the · battery. Make the proper input and output wire connections for each unit. Connect the speaker wires of the wiring harness. Connect the wiring harness wires in the following order: ground, battery, ignition. Connect the wiring harness connector to the unit. Install the unit in your car. Reconnect the · battery. Press the reset button.
CONNECTION/INSTALLATION Connection R Connecting wires to terminals USB terminal (0.8 m): See page 52.*3 See page 53.*1 10 A fuse See page 52. Connect the antenna cord to the antenna terminal. Connect SiriusXM Connect Vehicle Tuner (commercially available).*2 (Page 52) Purple with white stripe (Reverse sensor wire) Only for KW-V41BT/KW-V21BT. Only for KW-V41BT Region 1/KW-V21BT Region 1. Only for KW-V41BT. If no connections are made, do not let the cable come out from the tab.
CONNECTION/INSTALLATION R Connecting a USB device/iPod/iPhone R Connecting external components iPod/iPhone except iPod nano (7th for iPod nano (7th Generation)/ iPod touch (5th Generation)/iPod touch Generation)/iPhone (5th Generation)/iPhone 5S/iPhone 5C/iPhone 5 5S/iPhone 5C/iPhone 5 (commercially available) (commercially available) *1 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged.
CONNECTION/INSTALLATION R Connecting microphone for Bluetooth (only for KW-V41BT/KW-V21BT) Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available).
REFERENCES Maintenance R Caution on cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. R Moisture condensation Moisture may condense on the lens inside the unit in the following cases: • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the unit may malfunction.
REFERENCES Playing MP3/WMA/WAVf iles • This unit can play back files with the extension code <.mp3>, <.wma>, or <.wav> (regardless of the letter case—upper/lower). • This unit can play back files that meet the conditions below: – Bit rate: MP3/WMA: 32 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG2) 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA) 44.1 kHz (for WAV) • This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3).
REFERENCES Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Use only “finalized” discs. • This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. • Some discs or files may not be played back due to their characteristics or recording conditions.
REFERENCES R Language codes (for DVD language selection) AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic GL GN GU HA HI HR HU HY IA IE IK IN IS IW JA JI JW KA KK KL KM KN KO KS KU KY LA LN LO
REFERENCES “Connection Error”: • The device is registered but the connection has failed. Connect the registered device. (Page 32) “Please Wait...”: • The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). “No Voice Device”: • The connected mobile phone does not have a voice recognition system. “No Data”: • No phone book data is contained in the connected Bluetooth phone.
REFERENCES “SXM Subscription Updated – Press Enter to Continue”: • Your subscription has been updated. Press the appropriate button to continue. “SXM Channel Locked” • The selected channel has been locked by the parental controls. Enter the unlock code when you are asked. (Page 27) “SXM Incorrect Lock Code” • The selected channel is a mature or parental lock channel, and locked by the parental lock or user lock code. Enter the correct lock code.
REFERENCES R iPod/iPhone R Tuner No sound comes out of the speakers. • Disconnect the iPod/iPhone, then connect it again. • Select another source, then reselect “iPod”. SSM automatic presetting does not work. • Store stations manually. (Page 22) The iPod/iPhone does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Reset the iPod/iPhone. Sound is distorted.
REFERENCES Specifications R Monitor section Picture Size (W x H) KW-V41BT: 6.95 inches (diagonal) wide 156.6 mm × 81.6 mm (6-3/16" × 3-3/16") KW-V21BT/KW-V11: 6.2 inches (diagonal) wide 137.5 mm × 77.2 mm (5-7/16" × 3-1/16") Display System Transparent TN LCD panel Drive System TFT active matrix system Number of Pixels 1 152 000 (800H × 480V × RGB) Effective Pixels 99.
REFERENCES R FM tuner section R Video section R General Frequency Range With channel interval set to 200 kHz: 87.9 MHz to 107.9 MHz With channel interval set to 50 kHz: 87.5 MHz to 108.
REFERENCES If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop. R Trademarks and licenses • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.
U.S.A. JVC AMERICAS CORP. TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVC Americ as Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TOTHE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATER IALS AND WORKMANSHIP from the date of ori ginal purchase for the period shown below. ("The Warranty Period") .
CANADA JVC JVC CANADA INC. WARRANTY GARANTIE Warranty applies only to PRODUCT distributed in Canada by JVC Canada Inc. Lagarantls' applrque seulement aux PRODUITS distrlbues au Canada par JVC Canada Inc. JVC CANADA INC. (hereafter called "JVC") grves the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer. JVC warrants that this JVC product is free, under normal use and maintenance.
