Owner's Manual

ODiscs
Recordable/Rewritable
discs
cannot
be
played
back.
Insert
a finalized disc.
•
Finalize the discs
with
the
component
which you
used for recording.
Tracks
on
the
Recordable/Rewritable
discs
cannot
be
skipped.
• Insert
a finalized disc.
• Finalize the discs
with
the
component
which you
used for recording.
Playback
does
not
start.
•
The format
of
files
is
not
supported by the unit.
No
picture
appears
on
the
external
monitor.
• Connect
the video cord correctly.
• Select the correct
input
on
the
external monitor.
DivX*
/MPEG
1/MPEG2/MP3/WMA/W
AV
I
AAC
discs
cannot
be
played
back.
•
Record the tracks using a compatible application
on the appropriate discs. (Page
86)
•
Add appropriate extension codes
to
the
file
names.
Tracks
on
the
Recordable/Rewritable
discs are
not
played
back
as
you
have
intended
them
to
play.
•
Playback order may differ
from
the one played
back using other players.
*
Only
for
KW-V230BT/KW-V330BT
Region
4/KW-V630BT.
OUSB
"Reading"
does
not
disappear
from
the
screen.
•
Turn the
power
off
and on again.
While
playing
a
track,
sound
is
sometimes
interrupted.
• The tracks are
not
properly copied into
the
USB
device.
Copy
the
tracks again, and try again.
Tracks are
not
played
back
as
you
have
intended
them
to
play.
•
Playback order may differ from the one played
back using
other
players.
OAndroid
Sound
cannot
be
heard
during
playback.
•
Reconnect
the
Android device.
•
When
<Android
Setup>
is
set
to
[AUDIO
MODE],
launch any media player application on
the
Android device and start playback.
Sound
output
only
from
the
Android
device.
•
When
<Android
Setup>
is
set
to
[AUDIO
MODE],
relaunch
the
current media player application or
use
another media player application.
•
Restart the Android device.
• If
this does
not
solve the problem, the connected
Android device
is
unable
to
route the audio signal
to
unit.
Cannot
playback
when
<Android
Setup>
is set
to
[AUTO MODE].
•
Make sure
JVC
Music
Play
APP
is
installed
on the
Android device.
•
Reconnect
the
Android device and select the
appropriate control mode.
•
If
this does
not
solve the problem, the connected
Android device does
not
support the Auto Mode.
"NO
DEVICE"
or
''READING"
keeps
flashing.
• Switch
off
the developer options on the Android
device.
•
Reconnect
the
Android device.
•
If
this does
not
solve the problem,
the
connected
Android device does
not
support
the
Auto Mode.
0 iPod/iPhone
No
sound
comes
out
of
the
speakers.
•
Disconnect
the
iPod/iPhone, then connect
it
again.
• Select another source, then reselect
"iPod".
The
iPod/iPhone
does
not
turn
on
or
does
not
work.
• Check
the connecting cable and its connection.
•
Update the firmware version.
Charge
the battery.
Reset
the iPod/iPhone.
Sound
is
distorted.
•
Deactivate
the
equalizer either on this
unit
or the
iPod/iPhone.
A
lot
of
noise is
generated.
•
Turn
off
(uncheck) "VoiceOver" on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No
operations
are
available
when
playing
back a
track
containing
artwork.
• Operate the
unit
after the artwork
has
loaded.
Videos
cannot
be
played.
• Connect
with
USB
Audio and Video cable
KS-U59
(optional accessory)
to
iPod/iPhone
30-pin
connector
model.
Other cables cannot be used.
Select
[USB+
AV-IN]
for
<iPod
Setup>.
(Page
23)
Continued
on
the
next
page
...
ENGLISH
I
91