Owner's Manual

24
Tuner
Listening to the radio
R Indications and buttons on the source
control screen
657
21
43
Radio reception information
1 Preset no.
2 Seek mode (See the right column.)
3 Text information
t Touching [<] scrolls the text if not all of the
text is shown.
t Touching [
] switches the information as
follows:
– Frequency/PS name/Radio Text/title and
artist
– Frequency/PTY genre/Radio Text plus
4 Preset list (Page25)
5 TI indicator (Page 26)
6 ST/MONO indicator: Lights up when receiving
an FM stereo broadcast with sufficient signal
strength.
7 RDS indicator: Lights up when receiving an RBDS
station.
Operation buttons
[AUTO1]/
[AUTO2]/
[MANUAL]
Changes the seek mode. Each time
you touch the button, the seek
mode changes as follows:
t AUTO1: Auto search
t AUTO2: Tunes in stations in the
memory one after another.
t MANUAL: Manual search
[
]
Displays the other operation
button window.
t To hide the window, touch [
].
[
]
Displays the preset list.
t To hide the list, touch [
].
[AM] Selects the AM band.
[FM] Selects the FM band.
[
]
Attenuate the sound. (Page6)
t To restore the sound, touch
[
].
[S] [T]
Searches for a station.
t The search method differs
according to the selected seek
mode. (See above.)
[TI]* Activates/deactivates TI standby
reception mode. (Page26)
[SSM]* Presets stations automatically. (See
the right column.)
[PTY]* Enters PTY search mode.
(Page25)
[MONO] Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
t The MONO indicator lights
up while monaural mode is
activated.
t To display all available operation buttons, touch
[
] to display the other operation button window.
* Appears only when FM is selected as the band.
Presetting stations
R Storing stations in the memory
You can preset 15 stations for FM and 5 stations for
AM.
Automatic presetting — SSM (Strong-station
Sequential Memory) (For FM only)
The confirmation message appears. Touch [Yes].
The local stations with the strongest signals are
found and stored automatically.