Owner's Manual

ENGLISH 35
OTHER EXTERNAL COMPONENTS
Using a rear view camera
t To connect a rear view camera, see page69.
t To use a rear view camera, a REVERSE lead
connection is required. (Page67)
R Settings for the rear view camera
1 Display the <SETUP> screen.
On the Home screen:
t You can also display the <SETUP> screen by
touching [
] on the source/option selection
screen. (Page8)
2 Display the <Camera> screen.
3 Configure the camera settings.
Setting items
[R-CAM
Interruption]
t ON (Initial): Displays the picture
from the rear view camera when
you shift the gear to the reverse
(R) position.
t OFF: Select this when no camera
is connected.
[Parking
Guidelines]
t ON (Initial): Displays the parking
guidelines to enable easier
parking when you shift the gear
to the reverse (R) position.
t OFF: Hides the parking
guidelines.
[Guidelines
Setup]*
Adjusts the parking guidelines
according to the size of the car,
parking space and so on. (See the
right column.)
* Selectable only when [Parking Guidelines] is set to [ON].
Adjusting the parking guidelines
t Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
t When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1 Touch [Guidelines Setup] on the
<Camera> screen. (See the far left
column.)
The guidelines settings screen is displayed.
2 Touch one of the marks to adjust (1),
then adjust the position of the selected
mark (2).
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
t Touch [Initialize] and after touch [Yes] to set
all the
marks to the initial default position.