Owner's Manual

Tuner
39English
Traffic Information (FM only)
You can listen to and watch traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio
Broadcast Data System that includes TI
information.
1
Touch [ ] on the left side of the screen.
Touch [TI].
 Traffic information mode is set.
Ñ When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to turn on the Traffic Information
function in order to allow the Traffic Information
screen to appear automatically.
• The volume setting made during reception of
traffic information is automatically memorized.
When the traffic information is received next time,
this unit recalls the volume setting automatically.
Tuner Setup
You can set tuner related parameters.
1
Touch [ ] on the left side of the screen.
Touch [SETUP].
 TUNER SETUP screen appears.
2
Set each function as follows.
■ [Area Setting]
The tuner channel interval changes
depending on the area where you use this
unit.
[US] (Default): Select this when using this unit
in North/ Central/ South America. FM and
AM intervals are set to 200 kHz and 10 kHz
respectively.
[SA]: Select this when using this unit in South
American countries where the FM interval
is 50 kHz. The AM interval is set to 10 kHz.
[Europe]: Select this when using this unit in
any other areas. FM and AM intervals are
set to 50 kHz and 9 kHz respectively.
!B5A-2487-00_18KWV_K_En.indb 39 2018/02/20 18:49