Instruction Manual (Asia)

ENGLISH
29
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Symptom Remedy
USB/iPod
“UNSUPPORTED DEVICE”
appears.
• Check whether the connected USB device is compatible
with this unit and ensure the file systems are in
supported formats. (Page 27)
• Reattach the USB device.
“UNRESPONSIVE DEVICE”
appears.
Make sure the USB device is not malfunction and reattach
the USB device.
“USB HUB IS NOT
SUPPORTED” appears.
This unit cannot support a USB device connected via a
USB hub.
“CANNOT PLAY” appears. Connect a USB device that contains playable audio files.
• The source does not
change to “USB” when
you connect a USB device
while listening to another
source.
• “USB ERROR” appears.
The USB port is drawing more power than the design
limit. Turn the power off and unplug the USB device.
Then, turn on the power and reattach the USB device.
If this does not solve the problem, turn the power off and
on (or reset the unit) before replacing with another USB
device.
The iPod/iPhone does not
turn on or does not work.
• Check the connection between this unit and iPod/iPhone.
• Disconnect and reset the iPod/iPhone using hard reset.
“LOADING” appears when
you enter search mode by
pressing
.
This unit is still preparing the iPod/iPhone music list. It
may take some time to load, try again later.
“NO DEVICE” Connect a device (USB/iPod/iPhone), and change the
source to USB/iPod USB again.
“iPod ERROR” • Reconnect the iPod.
• Reset the iPod.
• Press and hold SOURCE
B to turn off the power. Turn the
power on again for error recovery.
“MEMORY FULL” You have reached the maximum storage limit of your
iPod/iPhone.
Troubleshooting
Symptom Remedy
Bluetooth®
No Bluetooth device is
detected.
• Search from the Bluetooth device again.
• Reset the unit. (Page 4)
Bluetooth pairing cannot
be made.
• Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (Page 13)
Echo or noise is
heard during a phone
conversation.
• Adjust the microphone unit’s position. (Page 12)
• Check the [ECHO CANCEL] setting. (Page 15)
Phone sound quality is
poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
Phone call sound cannot
be heard from the car
speakers.
Press
during a call to switch between hands-free
and private talk mode. (Page 14)
Voice calling method is not
successful.
• Use voice calling method in a more quiet environment.
• Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is
used.
Sound is being interrupted
or skipped during playback
of a Bluetooth audio player.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the
unit.
KW-X850BT_M_B5A-3844-00_EN_3rd Draft.indd 29KW-X850BT_M_B5A-3844-00_EN_3rd Draft.indd 29 4/2/2022 5:25:34 PM4/2/2022 5:25:34 PM