Instruction Manual (Europe)

32
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Installing the unit (in-dash mounting)
Installation/Connection
Do the required wiring. (Page 33)
Dashboard of your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
Removing the unit
1 Fit the catch pin on the extraction keys into the
holes on both sides of the trim plate, then pull it
out.
2 Insert the extraction keys deeply into the slots on
each side, then follow the arrows as shown below.
Installing the unit (without mounting sleeve)
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the vehicle
mounting bracket and secure the unit with screws (supplied).
Use only the specified screws. Using wrong screws might damage
the unit.
KW-X850BT_E_B5A-3842-00_EN_1st Draft.indd 32KW-X850BT_E_B5A-3842-00_EN_1st Draft.indd 32 27/8/2021 5:09:23 PM27/8/2021 5:09:23 PM