Owner's Manual
Table Of Contents
- Instruction Manual
- Forced Eject
- Detaching / Attaching Faceplate
- Table of Contents
- Parts & Controls
- Installation Settings
- Basic Operations
- Switching Screens
- Navigation System
- Basic Operations
- Registering your Home / Favorite Points
- Searching for a Place
- How you are Guided
- Arranging your Route
- Editing Registration of Home / Favorite Points
- Using Information Service (105NT50HDT Only)
- Checking the Information of the Navigation System
- Initializing Memories / Navigation Settings
- Navigation Menu Items
- Additional Information
- POI Icons
- AV Operations
- Bluetooth Operations
- Rear View Camera Operations
- Maintenance
- Troubleshooting / Error Messages
- Specs
- Installation / Connection Manual
- Remove Before Installation
- Fixing Faceplate to Unit
ENGLISH
79
Using Bluetooth device
To connect a Bluetooth device for the
first time
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate each other.
• Once you register a Bluetooth device, the device
remains registered until the registration is deleted.
(☞ page 80)
• Up to 5 devices can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
Bluetooth function of the device.
The sample screen shown here depicts the KW-NT50HDT.
When using the KW-NT30HD, the Device Name displayed
is “KW-NT30HD”.
1 Operate the Bluetooth device to turn on its
Bluetooth function.
2 Display the Bluetooth setting screen.
For connecting a Bluetooth mobile phone
<Phone Settings> is displayed.
Registering a Bluetooth device
PIN code (initial: 0000)
For connecting a Bluetooth audio player
• To activate “BT Audio” for source selection, ☞
page 75 (<Bluetooth Audio>).
<Mode> is displayed.
3 Change the PIN code.
• If you skip changing PIN code, go to step 4.
4
Continued on the next page
Press: Deletes last character
Hold: Deletes all characters
EN_KW-NT30_50[J].indb 79 2/3/2011 9:28:03 AM