Owner's Manual
Table Of Contents
- Instruction Manual
- Reset to Default
- Forced Eject
- Table of Contents
- Parts & Controls
- Installation Settings
- Basic Operations
- Switching Screens
- Navigation System
- AV Operations
- Common Operations on AV Screens
- Listening to the Radio
- Disc Operations
- SD / USB Operations
- Listening to the iPod / iPhone
- iHeartRadio Operations
- Pandora Internet Radio Operations
- Listening to SiriusXM Radio
- Using External Components
- Changing Illumination Color
- Settings for Video Playback
- System Setting Items
- Additional Information
- Sound Settings
- Bluetooth Operations
- Rear View Camera Operations
- Setting the Security Lock
- Maintenance
- Troubleshooting / Error Messages
- Specs
- Installation / Connection Manual
- Using "NaviBridge" (Downloaded from Vendor Web Site)
11
ENGLISH
Basic operationsInstallation settings
When you turn on the unit for the first time, the initial
setup screen appears.
1 Turn on the ignition switch.
The power of the unit is turned on.
2 Select the language you want for the display
and the voice guidance.
• You can also select the system language through
<Settings> - <System> - <Region> -
<Language>. (☞ page 82)
3 Set the installation settings (1), then press
[OK] (2).
State/
Province
Select the State or Province where
you are now.
Time Zone * Select your residential area for
automatic clock adjustment by
GPS signal.
DST * Select [Auto] if your residential
area is subject to Daylight Saving
Time.
Camera
Input *
Select [On] when connecting the
rear view camera to the CAMERA
IN jack.
* You can also change these settings through
<Settings> - <System>. (☞ page 83, 84)
Turning on the power
Turn on the ignition switch.
• When displaying the map screen for the first time
after turning on the power, the screen below
appears. Press [OK] to use the map screen.
• The power is turned off when the ignition switch is
turned off.
Turning off/on the screen
Press and hold to turn the screen off.
Touch the screen to turn it on again.
• You can erase the clock display while the screen is
turned off. (<Clock on Video/Screen-Off>, ☞
page 83)