Owner's Manual
Table Of Contents
- Instruction Manual
- Reset to Default
- Forced Eject
- Table of Contents
- Parts & Controls
- Installation Settings
- Basic Operations
- Switching Screens
- Navigation System
- Basic Operations
- Registering your Home / Favorite Points
- Searching for a Place
- How you are Guided
- Arranging your Route
- Editing Registration of Home / Favorite Points
- Using Information Service from HD Radio or iHeartRADIO (KW-NT510HDT Only)
- Checking the Information of the Navigation System
- Navigation Menu Items
- Additional Information
- POI Icons
- AV Operations
- Common Operations on AV Screens
- Listening to the HD Radio (KW-NT510HDT Only)
- Listening to the Radio
- Disc Operations
- SD / USB Operations
- Listening to the iPod / iPhone
- iHeartRadio Operations
- Pandora Internet Radio Operations
- Listening to SiriusXM Radio
- Using External Components
- Changing Illumination Color
- Settings for Video Playback
- System Setting Items
- Additional Information
- Sound Settings
- Bluetooth Operations
- Rear View Camera Operations
- Setting the Security Lock
- Maintenance
- Troubleshooting / Error Messages
- Specs
- Installation / Connection Manual
38
ENGLISH
Checking the information of the navigation system
q Connection status of the reverse gear signal lead
<On>: Reverse gear signal is detected.
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected (<On>).
w Information service being received
(Traffic or Area information; only for KW-NT510HDT)
*
1
About calibration
The calibration is a function conducted in order to
display the current position more accurately using
signals from GPS and the internal sensors.
Even after calibration status changed to
<Learned>, the system will keep learning to make
the current position more accurate.
• The calibration does not function without the
connection of GPS antenna and the speed signal
lead. For the connection, ☞ Installation/Connection
Manual (separate volume).
• Driving under various conditions completes the
calibration faster. If <Learning> remains on the
screen for a long period, check the connection of the
GPS antenna and the speed signal lead.
• While learning is going on, the current position may
not be displayed correctly .
1 Version of the software
2 Version of the map database
3 Serial number
4 Speed pulse rate
5 GPS antenna connection status
<OK>: GPS antenna is detected (the figure
shows the number of GPS satellites being
received).
<NG>: GPS antenna is not detected
6 Status of the gyroscope
7 Status of calibration *
1
<Learning>: The system has started learning
calibration data.
<Learned>: Though learning is almost complete,
the system is still learning to make the calibration
data more accurate.
8 Resets the calibration data.
Reset the data if you replace the tires or if the
current position is displayed far from the actual
position
9 Connection status of the illumination control lead
<On>: The illumination signal is detected.
p Connection status of the parking brake lead
<On>: The parking brake is engaged.
System Info
1 Press - <Settings>.
2
1
2
3
Sensor Status
1 Press - <Settings>.
2
9
4
5
6
7
p
q
8
w
EN_KW-NT510HDT_NT310[J].indb 38 11/8/2012 2:49:25 PM