INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
Error Messages and Actions
Warning display
on the externally-connected display screen or the Live View screen, tally lamp indication
and warning tone are displayed or output according to the error status as shown in the table below.
Memo :
0
This camera recorder makes use of a microcomputer. Noise interference from external sources may
prevent it
from functioning properly. When this occurs, turn off and on the power of the camera recorder
again.
Error Message Status Action
Turn Power Off Turn Back On
Later
System error.
* The
tally lamp blinks twice every
second.
Turn off the power, and turn it on
again.
If the error persists, please contact
the local dealers in your area.
Media Was Removed.
0
Card is
removed while recording
is in progress.
0
Card is removed while
formatting is in progress.
0
Card is removed while restoring
is in progress.
0
Card is removed while adding
the OK mark.
0
Card is removed while writing a
setup file.
0
Card is removed while deleting a
clip.
Restore the card using this camera
recorder.
(A P28 [Restoring the microSD
Card] )
Media Full
0
[REC]
button is pressed when
the media in use has no
remaining space.
0
Remaining space
ran out during
recording.
Replace the microSD card with a
new one.
No Media [REC] button is pressed when a
microSD card is not inserted.
Insert a microSD card.
(A P27 [Inserting an microSD
Card] )
List of FTP Transfer Errors
If the upload of a recorded clip or download of the metadata setup file (XML format) is not successfully
completed, the following errors are displayed.
Error message Status Action
Timeout. Transfer was discontinued due to
timeout caused by network
transmission or server failure.
0
Execute again.
0
Use a different server.
Media Was Removed. microSD card is removed while FTP
transfer is in progress.
Insert the microSD card and
execute FTP transfer again.
Adapter Was Removed. The USB network device is
removed while FTP transfer is in
progress.
Connect the USB network device.
Cannot Connect to Server. Unable to connect to the FTP server. Adjust the Server and Port settings
for [Metadata Server
] or [
Clip
Server].
(A P64 [ Metadata Server ] )
(A P63 [ Clip Server ] )
Error Messages and Actions
101
Others