INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
Blinking of the Tally Lamp
The lamp appears blinking such as when the remaining level of the microSD card is running low, or when
a system error occurs on the camera.
* The
operation changes according to the menu settings. To configure the setting, go to [Main Menu] B
[System]
B [Tally Lamp].
(A P66 [ Tally Lamp ] )
Blinking Mode Description
Blinks slowly
(once every second)
0
Remaining recording time on microSD card is less than 3 minutes
(during recording)
0
When a malfunction occurred during live streaming
Blinks quickly
(2 times per second)
0
Remaining
recording
time on microSD card is zero (during recording)
0
Error on the camera recorder
0
When an error occurs during control via the controller
104
Error Messages and Actions
Others