INSTRUCTIONS

Terminal Section
.
G
J
I
H
M
F
C
A
B
D
E
K
L
N
A
Anti-theft wire mounting hole
B
[LAN(PoE+)] LAN (PoE+) terminal
For connecting the LAN cable.
C
microSD card slot
For inserting the microSD card.
(A P27 [Compatible microSD Cards] )
D
Reset switch
Short press
: Restores the video output
setting to the default setting
and restarts the camera. (*1)
Press and hold : Restores all items in the
[Network] menu to their
default settings. (*2)
*1 Applies
to
[HDMI/SDI Out] and [Resolution] in
the Video Set menu, [Frame Rate] in the
Network menu, [System Mode] in the [System]
menu, and [Frame Rate] and [Bit Rate] in the
Record Set menu.
(A P59 [ HDMI/SDI Out ] )
(A P59 [ Resolution ] )
(A P62 [ Frame Rate ] )
(A P65 [ System Mode ] )
(A P67 [ Frame Rate ] )
(A P67 [ Bit Rate ] )
*2 Works in the same way as [Reset Network
Settings]. The power lamp blinks in blue while
reset is in progress.
(A P64 [ Reset Network Settings ] )
E
[DC 12V] DC input terminal
For connecting the supplied AC adapter to
supply DC 12 V.
F
Cable clamp hole
G
HDMI cable fixing hole
H
[HDMI] HDMI terminal
Output terminal for HDMI video and audio
signals.
I
[AUDIO IN
] AUDIO input terminal
For connecting the stereo mini plug.
J
[RS-422] RS-422 terminal
For connecting the RS-422 cable.
.
13
2
75
468
Pin
Number
Signal
Name
Pin
Number
Signal
Name
1 GND 5 TXD+
2 TALLY 6 RXD+
3 RXD- 7 -
4 TXD- 8 -
K
[USB]
USB terminal
For connecting a network device.
L
[SDI OUT] SDI output terminal
Output terminal for SDI video and audio signals.
M
Infrared remote control sensor
N
[RS-232C IN/OUT] RS-232C input/output
terminal
For connecting the RS-232C cable.
[RS-232C IN]: Input terminal for RS-232C
remote (Mini DIN 8-pin)
[RS-232C OUT]: Output terminal for RS-232C
remote (Mini DIN 8-pin)
.
12
543
678
RS-232C IN RS-232C OUT
Pin
Number
Signal
Name
Pin
Number
Signal Name
1 DTR_IN 1 DTR_OUT
2 DSR_IN 2 DSR_OUT
3 TXD_IN 3 TXD_OUT
4 GND 4 GND
5 RXD_IN 5 RXD_OUT
6 GND 6 GND
7 IR_OUT 7 NC
8 IR_OUT 8 NC
Names of Parts
21
Getting Started