INSTRUCTIONS

Installing the Camera on
the Ceiling
1
Set the DIP switch.
0
Set the DIP switch prior to mounting the
camera to the ceiling mount bracket.
2
Insert an microSD card.
0
Insert the card as necessary during
installation.
3
Attach the fall prevention wire (camera),
which
is
fixed to the ceiling mount bracket,
to the camera.
.
0
Insert the tip of the fall prevention wire
(camera) to the groove of the camera, and
move it toward the direction indicated by the
arrow.
0
Check that the fall prevention wire (camera)
is fixed securely to the camera.
4
Mount the camera to the ceiling mount
bracket.
.
0
Align the cutout of the ceiling mount bracket
and the line indicated on the camera. Press
the camera unit to insert, and then turn the
camera clockwise.
5
Fix the camera and the fall prevention wire
(ceiling)
on
the ceiling mount bracket using
the provided screw (M3).
.
0
Check that the screws are tighten securely
when mounting is completed.
6
Connect the adapter to the [USB] terminal.
0
When needed, connect the adapter
according to the intended purpose.
(A P75 [Connecting to Network via [USB]
Terminal] )
Connect the cables after these procedures.
Installing the Camera on the Ceiling
31
Installation/Connection