INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
Configuring IP Address Manually
Display the menu screen on the external monitor
using the infrared remote control to set the IP
address.
0
Connection via the LAN terminal
(A P75 [Connecting to Network via [LAN]
Terminal] )
0
Connection via the USB terminal
(
A P75 [Connecting to Network via [USB]
Terminal] )
Confirming the
Connection
Operating Environment
Operation has been verified for the following
environments.
0
Computer
0
OS: Windows 7
Web browser: Google Chrome
0
OS: Windows 10
Web browser: Google Chrome
0
OS: Mac OS X 10.11
Web browser: Safari
1
Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the IP Address in the
address field.
0
(Example: http://192.168.0.25)
Memo :
0
The default IP address of the camera is as
follows.
LAN terminal: 192.168.0.10
USB terminal (Ethernet adapter): 192.168.1.10
2
Enter the user name and password.
0
Enter the user name (jvc) and the password
(initial password: 0000) on the login screen
to display the Live View screen.
.
Memo :
0
The Live View screen is not displayed when
[Main Menu]
B [Network] B [Web] B [Web
Access] is set to “Off”.
0
Be sure to change the login password on first
login.
(A P
60 [ Login Password ] )
IP Address Settings
35
Installation/Connection