INSTRUCTIONS

Digital Zoom
For setting whether to enable the digital zoom
function.
0
Off:
Enables only the optical zoom (1x to 30x).
0
On:
Enables the dynamic zoom (30x to 360x) in
addition to the optical zoom.
[Setting Values: ROff, On]
Focus Mode
For setting the focusing operation.
[Setting Values: RAuto, Manual]
AF Speed
For setting the AF operation speed.
[Setting Values: RFast, Slow]
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P59 [ Test Tone ] )
Camera Process Menu
Menu screen for adjusting the quality of camera
images.
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: Off, -5 to +5 (R0)]
High Sensitivity
Setting to “On
” increases the maximum gain level
for a bright screen even in a dimly-lit environment.
[Setting Values: On, ROff]
Memo :
0
Note that increasing the gain level may cause
noise to become more noticeable.
NR
Decreases noise in the image.
0
High:
Applies a strong amount of noise reduction.
0
Low:
Applies a weak amount of noise reduction.
0
Off:
Disables noise reduction.
[Setting Values: High, RLow, Off]
WDR
For setting the WDR (Wide Dynamic Range)
function.
When shooting object with wide dynamic range
due to backlight conditions, this function
compresses the dynamic range while maintaining
image contrast through providing gradation
compensation to the input video signals.
0
Strong:
Enhances
the
effect of gradation compensation
for object with wide dynamic range due to
outdoor or strong backlight conditions.
0
Natural:
Normal setting for wide dynamic range.
0
Weak:
Reduces the effect of gradation compensation
compared to the normal setting.
0
Off:
Sets the wide dynamic range function to “Off”.
[Setting Values: Strong, Natural, Weak, ROff]
56
Camera Function Menu
Menu Display and Detailed Settings