INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
Connecting External
Monitor
0
To
output
live video images and audio sound to
an external monitor, select the output signals
from the camera, and connect using an
appropriate cable according to the monitor to be
used.
0
Choose the most suitable terminal according to
the monitor in use.
0
[SDI OUT] terminal:
Outputs 3G-SDI/HD-SDI signals.
0
[HDMI] terminal:
Outputs HDMI signals.
Memo :
0
If the [SDI OUT
] terminal or [HDMI] terminal is
connected, configure the settings in the [A/V
Set] menu according to the monitor to be
connected.
(A P59
[ HDMI/SDI Out ] )
0
To display
the menu screen or display screen on
the external monitor, set [System] B
[Information Display] to “On” and [Output] to
“All”.
Connecting via SDI
0
Digital video signals, together with embedded
(superimposed) audio signals and time code
signals, are output for the 3G-SDI/HD-SDI
signals.
Memo :
0
The sampling frequency for embedded
(superimposed) audio signals is 48 kHz. Time
code of the built-in time code generator is also
output.
Connecting External Monitor
73
Connecting External Devices