INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
B
Click
[Change]
to switch the camera to the
Remote Edit mode.
.
Memo :
0
When the menu or status is displayed, display
of the confirmation screen will be put on hold.
0
If the
menu is displayed on the camera recorder,
close the menu.
0
If the status is displayed on the camera recorder,
close the status display.
0
When FTP upload via the camera unit is
currently in progress, switching to the Remote
Edit mode is disabled.
4
Select the Metadata Edit mode.
Select the [Meta data] tab.
5
Select the clip to rewrite the metadata.
0
A list of the recorded clips appears on the
[Clip list] screen.
0
Click on
the clip for which you want to rewrite
the metadata.
.
4
5
Memo :
0
You can
use the [J-30] or [K+30] tab to jump to
the previous or next 30 clips on the list.
6
Edit the metadata of the selected clips.
A
Edit the information for the necessary fields.
B
You
can
click the [OK Mark] to add an OK mark
to or delete it from the selected clips.
C
After editing is complete, click [Save] to
overwrite the metadata.
.
C
A
B
7
Click [OK] on the confirmation screen.
0
Update of the metadata starts.
0
After update is complete, “Renewal of clip
metadata is succeeded.” is displayed. Click
[
OK].
0
Returns to the screen in step 4.
.
7
OK
Renewal of clip metadata is
succeeded.
Memo :
0
If update failed, “Renewal of clip metadata is
failed.” is displayed.
Click [Close] to return to the screen of 4.
82
Editing Metadata
Connecting to the Network