INSTRUCTIONS(Installation/IP Address Settings)

About microSD Cards
Compatible microSD Cards
Bit Rate Setting and Usable microSD Card
Combinations
System Format Bit Rate
Usable
microSD Card
HD QuickTime
50M Class 10 or
higher
35M
28M
18M
5M
Class 6 or higher
Memo :
0
To use a microSDHC card, set [4GB File
Spanning(SDXC)] to “On”.
Caution :
0
Using cards other than those from Panasonic,
TOSHIBA or SanDisk may result in recording
failure or data loss.
0
If
an
UHS-I card with no classification indication
is used, it may not be possible to perform
recording.
Estimated Recordable Time of microSD Cards
The estimated recordable time is only a guide.
Differences may
occur depending on the condition
of the microSD card in use.
Frame Rate
(*1)
60p,
60i,
50p,
50i
60i,
30p,
50i,
25p
60p,
50p
60i,
30p,
50i,
25p
60i,
50i
Frame Rate (*2) -
60p,
50p
-
60p,
50p,
30p,
25p
30p,
25p
Bit Rate 50M 35M 28M 18M 5M
4GB 9 12 15 23 84
8GB 18 25 31 47 170
16GB 36 50 62 95 340
32GB 72 100 125 190 680
64GB
(SDXC)
145 200 250 380 1360
128GB
(SDXC)
290 400 500 760 2720
(Unit: minute)
*1 When [Main Menu]
B [System] B [System
Mode] is set to “1080/60” or “1080/50”
*2 When [Main Menu] B [System] B [System
Mode] is set to “720/60” or “720/50”
Memo :
0
If the microSD card contains files recorded by
devices other than this camera recorder or files
that are saved from a PC, the recordable time
may be shorter or data may not be properly
recorded.
0
Up
to
600 clips can be recorded to one microSD
card on this unit. When 600 clips are recorded
to one card, the remaining space is displayed as
0 min regardless of the estimated recordable
time, and no further recording can be performed.
Inserting an microSD Card
.
1
Insert the microSD card into the slot
according to the orientation indicated by
the illustration.
Removing the microSD Card
1
Push the microSD card and remove it from
the slot.
Caution :
0
Data may be lost if you turn off the power of the
camera recorder or remove the microSD card
when it
is being accessed. All data recorded on
the card, including the file that is being
accessed, may be corrupted. To turn off the
power or remove the card, do so at least 20
seconds after data access has been stopped.
0
The microSD card may not be recognized if you
insert and remove the card within a short time.
When this happens, remove the card and wait
for a few seconds before you reinsert.
About microSD Cards
19
Getting Started