INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
Installing the Camera on
the Ceiling
1
Set the DIP switch.
0
Set the DIP switch prior to mounting the
camera to the ceiling mount bracket.
2
Insert an microSD card.
0
Insert the card as necessary during
installation.
3
Attach the fall prevention wire (camera),
which
is
fixed to the ceiling mount bracket,
to the camera.
.
0
Insert the tip of the fall prevention wire
(camera) to the groove of the camera, and
move it toward the direction indicated by the
arrow.
0
Check that the fall prevention wire (camera)
is fixed securely to the camera.
4
Mount the camera to the ceiling mount
bracket.
.
0
Align the cutout of the ceiling mount bracket
and the line indicated on the camera. Press
the camera unit to insert, and then turn the
camera clockwise.
5
Fix the camera and the fall prevention wire
(ceiling)
on
the ceiling mount bracket using
the provided screw (M3).
.
0
Check that the screws are tighten securely
when mounting is completed.
6
Connect the adapter to the [USB] terminal.
0
When needed, connect the adapter
according to the intended purpose.
(A P75 [Connecting to Network via [USB]
Terminal] )
Connect the cables after these procedures.
Installing the Camera on the Ceiling
31
Installation/Connection