INSTRUCTIONS

Connecting to Network via [LAN]
Terminal
1
Connect the [LAN] terminal of the camera
with
devices
such as a PC or the RM-LP100
using a LAN cable.
2
Configure the connection settings.
0
Select [Main Menu]
B [Network] B
[Connection Setup] B [LAN Wizard] and
press the Set button (Set).
0
Pressing the button displays a network
setting screen.
.
DHCP
Back Next
Manual
IP Address Configuration
0
Follow the screen instructions to complete
setting. Perform setting for the following.
0
IP address setting (DHCP or manual)
0
IP Address
0
Subnet mask
0
Default gateway
0
DNS Server
Memo :
0
When an
address is manually assigned in a NAT
environment, it is also necessary to set the
default gateway correctly besides conversion of
the address at the router’s end in order to
perform operations such as access to the
Internet from an external network via the router.
3
Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
(A P87 [Changing Settings] )
Connecting to Network via
[USB]
Terminal
1
Connect an appropriate adapter according
to
the
intended use to the [USB] terminal at
the rear of the camera recorder.
The following adapters can be connected.
0
Wireless LAN adapter
0
Ethernet adapter
0
Cellular adapter
Memo :
0
Only a network connection adapter can be
connected to the [USB]
terminal.
0
Connect or
disconnect an adapter only after you
have turned off the power of the camera
recorder.
0
You can find the latest information on the
compatible adapters at the product page of our
website.
2
Configure the connection settings.
0
Select [Main Menu]
B [Network] B
[Connection Setup] B [USB Wizard] and
press the Set button (Set).
0
A wizard screen appears according to the
type of adapter connected. Follow the
instructions
on
the screen to perform setting.
(A P76 [Connecting via Wireless LAN
(USB)] )
(A P77 [Connecting via Ethernet Adapter
(USB)] )
(A P78 [Connecting via Cellular Adapter
(USB)] )
Memo :
0
When the menu is displayed on the Live View
screen via the USB terminal, starting the USB
wizard disconnects
the network and the display
will not be updated. Use the LAN terminal or
video/audio output terminals such as the HDMI
or SDI output terminal.
Network Connection
75
Connecting to the Network