INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
Changing USB Connection Settings
You can change the settings for each of the preset
items on the [USB Wizard] screen of the camera
recorder.
0
Items that cannot be changed are grayed out
according to
the type of adapter connected and
the mode of connection.
.
A
B
C
D
E
G
F
A
Type of Adapter Connected
B
Mode of Wireless LAN Connection
C
[Search Access Point] Button
Click to display a list of the detected access
points.
A check mark (c ) appears at the beginning of
the access point that is currently selected.
.
D
For configuring information required for
connecting to a wireless LAN access point.
E
IP Address Configuration
When “DHCP” is selected, all items will be
grayed out.
F
Settings when using cellular adapter
G
[OK]
/[Cancel] Button
After changing of settings is complete, click the
[OK] button.
Clicking [Execute] on the confirmation screen
changes the settings on the camera and
restarts the network.
Memo :
0
You can run [Search Access Point] only when
the
setting screen is displayed by connecting to
the network using the LAN terminal or when it is
displayed via an access point by connecting to
the network using the USB terminal.
Changing Settings
89
Connecting to the Network