INSTRUCTIONS

Changing Clip Server Settings
You can make direct changes to the server and
directory settings that are specified in [Clip
Server] on the [Settings] screen for uploading
recorded clips in the microSD card to the FTP
server.
.
A
.
B
J
D
C
F
E
G
H
I
A
Server
For selecting the FTP server.
B
Alias
For setting
a name to distinguish the settings of
this camera recorder.
The name set in this item will appear on the [FTP
Upload] action screen of the clip list display.
* Enter not more than 31 characters.
C
Protocol
For setting the protocol of the FTP server to be
connected.
0
FTP:
Protocol that does not encrypt the incoming
and outgoing data.
0
SFTP:
Protocol that encrypts incoming and
outgoing data using SSH.
0
FTPS:
Protocol that encrypts incoming and
outgoing data using SSL or TLS. It uses an
implicit mode (starts encrypted
communication once connection starts).
0
FTPES:
Protocol that encrypts incoming and
outgoing data using SSL or TLS. It uses an
explicit mode (starts encrypted
communication after permission is granted).
0
ZIXI:
Select
this
item when transferring files via the
ZIXI server.
[Setting Values: RFTP, SFTP, FTPS,
FTPES, ZIXI]
Memo :
0
To use the “ZIXI” setting, a dedicated server is
needed separately.
0
If “ZIXI” is set, the resume function is enabled.
D
Server
For setting the server name (“mystation.com”,
etc.) or the IP address (“192.168.0.1”, etc.) of
the FTP server.
*
Enter not more than 127 characters using
single-byte alphanumeric characters (a to z,
0 to 9), single-byte hyphen [-], or dot
[.].
E
Port
Enter the FTP server port number to use using
an integer between 1 and 65535.
The default value varies with the Protocol
setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21,
ZIXI: 2088)
F
Dir. Path
Enter the path name for the directory to upload
to (“/pub”, “/home/user”, etc.)
*
Enter not more than 127 characters.
G
Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
H
Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
I
Passive Mode
For setting whether to set the communication
mode
used
for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and
a connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Memo :
0
When [Protocol] is set to “SFTP
”, this item
appears as “---” and cannot be selected.
J
[Save
]
/[Cancel] Button
For saving the settings or canceling the action.
Changing Settings
91
Connecting to the Network