INSTRUCTIONS

Changing Live Streaming Settings
You can make direct changes to information on the
destination of distribution that is specified in [Live
Streaming
] on the [Settings] screen.
.
A
.
B
D
C
F
E
G
H
O
I
J
K
L
M
N
A
Server
For selecting the server for live streaming.
B
Destination Server
Press the
Select button if you want to configure
a server at the receiving end of the live
distribution.
C
Alias
For setting a name to distinguish the settings of
this camera.
The name set in this item will be displayed in the
[Server] options.
* The default value is “Server1”/“Server2”/
“Server3”/“Server4”.
* You
can enter up to 31 characters and ASCII
characters.
D
Type
For setting the system to transfer videos for
distribution.
Memo :
0
Use reception devices that are compatible with
the respective transfer systems.
0
To use the “ZIXI” setting, a dedicated server is
needed separately.
0
The following items that can be set vary
depending on the setting of this item.
E
Address
For setting details such as the host name and
the IP address of the live distribution
destination.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z,
0 to 9), single-byte hyphen [-], or dot
[.].
F
Port
Enter the network port number of the live
distribution destination using an integer
between 1 and 65535.
When [Type] is set to “UDP” (MPEG2-TS/UDP)
or “RTP” (MPEG2-TS/RTP), the default value is
“6504”. If “ZIXI” is set, the default value is
“2088”.
G
SMPTE 2022-1 FEC
Set to “On” to use FEC (Forward Error
Correction).
A transmission system that recovers the
missing packets in the decoding process
without having to retransmit the missing
packets.
* The decoder must be compatible with
SMPTE 2022-1.
H
FEC Matrix
For setting the amount of FEC (Forward Error
Correction) overhead for configuring
SMPTE2022-1.
* Setting range
0
4 ≦ L ≦ 20 (Default value: L = 10)
0
4 ≦ D ≦ 20 (Default value: D = 10)
0
L × D ≦ 100 (Default value: L×D = 10×10)
Memo :
0
This item is selectable only when [SMPTE
2022-1 FEC] is set to
“On”.
0
Increasing the amount of FEC overhead
increases the packet loss resilience but more
network bandwidth is used.
0
Even with the same amount of overhead,
increasing the L value will increase the packet
loss (continuous packet loss) resilience.
I
Stream ID
For setting the registered stream ID of the live
distribution destination.
The default value varies with the product model.
* Enter not more than 63 characters.
J
Password
For setting the [Stream ID] password.
There is no default value (blank).
* Enter not more than 127 characters.
92
Changing Settings
Connecting to the Network