INSTRUCTIONS
Table Of Contents
- Getting Started
- Installation/Connection
- Using View Remote
- Shooting
- Basic Shooting Procedures
- Selecting Video Recording Resolution, Frame Rate and Bit Rate
- Preset Mode
- Pan/Tilt Operation
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Loop Recording
- Menu Display and Detailed Settings
- Display/Status Screen
- Connecting External Devices
- Connecting to the Network
- Others
Reading the Connection Settings File
1
Select [Main Menu] B [Network] B
[Connection Setup]
and press the Set
button (Set).
2
Select [Load] and press the Set button
(Set).
.
2
3
Select the file to load using the cross-
shaped button (JK), and press the Set
button (Set).
.
3
4
Select [Load] on the confirmation screen,
and press the Set button (Set).
Loading starts, and “Loading...” appears on
the
screen.
.
4
5
Reading is complete.
After reading of the file is complete, “Complete
”
appears on the screen, and the menu screen
closes automatically.
Deleting Connection Settings
1
Select [Main Menu] B [Network
] B
[Connection Setup] and press the Set
button (Set).
2
Select [Delete] and press the Set button
(Set).
.
2
3
Select the file to delete using the cross-
shaped button (JK), and press the Set
button (Set).
.
3
4
Select [Delete] on the confirmation screen,
and press the Set button (Set).
Deletion starts, and “Deleting...” appears
on the
screen.
.
4
5
Deletion is complete.
After file deletion is complete, “Complete”
appears on the screen.
Managing the Network Connection Settings File
95
Connecting to the Network