INSTRUCTIONS

Performing Live
Streaming
By combining with the decoder or PC application
that supports live
streaming, you can perform audio
and video streaming via the network.
Supported Codecs
H.264, H.265, Motion JPEG
Memo :
0
When the supported codec is configured to “H.
265” and the resolution to “3820x2160
”, live
streaming is possible only for RTSP/RTP.
Supported Formats
[Streaming resolution (First Stream)]
3840x2160 T, 1920x1080, 1280x720,
1024x576, 720x480, 720x408,
640x480, 640x360
[Streaming resolution (Second Stream)]
720x480, 720x408, 640x480, 640x360, 480x320,
320x240
[Frame rate (when streaming resolution is
3840x2160)] T
30p, 29.97p, 25p
[Frame rate (for streaming resolutions other than
3840x2160)]
60p, 59.94p, 50p, 30p, 29.97p, 25p
[Audio]
AAC, 44.1kHz/48kHz, 96kbps/128kbps
Memo :
0
The range of configurable resolutions and
bitrates varies according to the codec that has
been selected.
0
Depending on the
type of network adapter used
and the connection, images and audio sound
during live streaming may be choppy.
Supported Protocols
RTSP/RTP, RTMP/RTMPS, SRT, Multicast,
NDI|HX T U
Memo :
0
Multicast is active only when the supported
codec is configured to “H.264”.
Setting Distribution
1
Configure the SYSTEM SELECT switch
Change the SYSTEM SELECT switch setting
according
to the
resolution and frame rate to be
used for streaming, followed by restarting the
camera.
(A P36 [Supported Streaming Formats] )
2
Configure the streaming video and audio
format
Configure the codec, resolution, frame rate and
bitrate settings in
[Video] and [Audio] of the
View Remote.
3
Set the distribution protocol
Configure the streaming protocol and related
items in the [Network]
settings of the View
Remote.
4
Restart the camera
After configuring the items, press the [Submit]
button followed by the [Reboot]
button in the
[System] menu to restart the camera.
Receive streaming data
Streaming starts automatically after the camera
has restarted. Configure the necessary settings for
the decoder and PC application to receive
streaming data.
o
URL when receiving streaming data using
RTSP/RTP
0
First Stream
rtsp://<IP address of this unit>:<Port no.>/1
0
Second Stream
rtsp://<IP address of this unit>:<Port no.>/2
o
URL when receiving streaming data using SRT
srt://<IP address of this unit>:<Port no.>?
mode=<SRT mode>
o
When receiving streaming
data using RTMP(S)
Enter the server and stream key into the MRL field
under the RTMP(S) setting in the
[Network]
settings
of
the View Remote, and view the content
from the designated video link after restarting the
camera.
o
URL when receiving streaming data using
Multicast
rtp://<IP address for multicast>:<Port no.>
o
When receiving streaming data using
NDI|HX T U
Install the NDI Tools on the PC for viewing. For
more information, please refer to the instruction
manual of the NDI Tools.
Performing Live Streaming
35
Connecting to the Network