. 4K PTZ REMOTE CAMERA KY-PZ400NWU/KY-PZ400NWE KY-PZ400NBU/KY-PZ400NBE HD PTZ REMOTE CAMERA KY-PZ200NWU/KY-PZ200NWE KY-PZ200NBU/KY-PZ200NBE KY-PZ200WU/KY-PZ200WE KY-PZ200BU/KY-PZ200BE INSTRUCTIONS This illustration is KY-PZ400. Specifications and appearance of this unit are subject to change for further improvement without prior notice. . Details For details on settings and operation, refer to “INSTRUCTIONS” on the website. Please check the latest INSTRUCTIONS, tools, etc. from the URL below.
FOR USA These are general Important Safety Instructions and certain items may not apply to all appliances. Important Safety Instructions Getting Started 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
POUR LES ÉTATS-UNIS Ces informations sont des CONSIGNES DE SÉCURITÉ IMPORTANTES et certains points peuvent ne pas s’appliquer à tous les appareils. CONSIGNES DE SÉCURITÉ IMPORTANTES 8. 9. 10. 11. 12. 13. Getting Started 1. 2. 3. 4. 5. 6. 7. Lire ces instructions. Conserver ces instructions. Tenir compte de tous les avertissements. Respecter toutes les instructions. Ne pas utiliser cet appareil à proximité de l’eau. Ne nettoyer qu’avec un chiffon sec. Ne pas boucher les ouvertures de ventilation.
Safety Precautions POUR CANADA FOR USA AND CANADA ATTENTION RISQUE D’ELECTROCUTION NE PAS OUVRIR Getting Started CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Déclaration de conformité du fournisseur KY-PZ400NWU/KY-PZ400NBU Numéro de KY-PZ200NWU/KY-PZ200NBU modèle : KY-PZ200WU/KY-PZ200BU Nom de marque : JVC Personne JVCKENWOOD USA responsable : Corporation Adresse : 1440 Corporate Drive, Irving, TX 75038 Numéro de 678-449-8879 téléphone : This device complies with Part 15 of the FCC Rules.
CAUTION: Attention: The mains plug shall remain readily operable. Remove the mains plug immediately if the camera functions abnormally. La prise secteur doit être opérationnelle. Débranchez immédiatement la fiche secteur si le caméscope ne fonctionne pas normalement. Getting Started . . WARNING: Avertissement: The battery pack, the camera with battery installed, and the remote control with battery installed should not be exposed to excessive heat such as direct sunlight, fire or the like.
. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. . L’appareil ne doit pas être exposé à de l’eau ou à des éclaboussures et les objets remplis de liquide, tels que des vases, ne doivent pas être placés sur l’appareil. . Do not point the lens directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. .
Getting Started When using the AC adapter in areas other than the USA Lorsque vous utilisez l'adaptateur secteur ailleurs qu’aux États-Unis The provided AC adapter features automatic voltage selection in the AC range from 110 V to 240 V. L'adaptateur secteur fourni dispose d'une sélection de tension automatique dans la plage CA de 110 V à 240 V.
IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. Where there are strong electromagnetic waves or magnetism, for example near a radio or TV transmitter, transformer, motor, etc., the picture and the sound may be disturbed. In such case, please keep the apparatus away from the sources of the disturbance. .
FOR EUROPE WARNING Getting Started This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. . The plastics packaging bags may cause suffocation when they are covered over the head. Tear them open, and keep them away from the reach of infants and children by ensuring that they are disposed of properly. Consult your dealer as special technique is required when installing this product.
Contents Menu Display and Detailed Settings Getting Started Installation/Connection Mounting the Camera to the Ceiling Mount Bracket ......................................................................... 21 Attaching Label to the Camera ........................ 21 Installing the Camera on the Ceiling ................ 22 Installing the Camera on a Desktop ................. 23 Attaching the Camera to a Tripod .................... 23 Connecting the Cables ....................................
Content of this Manual Symbols used Getting Started Caution : Describes precautions concerning the operation of this product. Memo : Describes reference information, such as functions and usage restrictions of this product. : Feature available on KYT PZ400NWU/KY-PZ400NWE/KYPZ400NBU/KY-PZ400NBE only. : Feature available on KYU PZ200NWU/KY-PZ200NWE/KYPZ200NBU/KY-PZ200NBE only. : Feature available on KYS PZ200WU/KY-PZ200WE/KYPZ200BU/KY-PZ200BE only.
Main Features 4K Ultra HD T Equipped with a 1/2.8" CMOS sensor (2.07 megapixels) that supports HD output U S This camera is equipped with a 1/2.8" CMOS sensor (2.07 megapixels) that enables video depiction of different scenes in HD resolution. 71° wide-angle lens + 12x optical zoom T The camera comes with an originally-customized premium 4K ultrawide-angle lens that boasts more than 8 megapixels, a 12x optical zoom and a maximum horizontal viewing angle of 71°.
Precautions Installation Location o Be sure to install the camera horizontally. Getting Started Storage and Usage Locations o Allowable ambient temperature and humidity Be sure to use this unit within the allowable temperature range of 0 °C to 40 °C (32 °F to 104°F) and a relative humidity of 30 % to 80 %. Using this unit at a temperature or humidity outside the allowable ranges could result not only in malfunction but also serious impact on the CMOS elements as small white spots may be generated.
Copyright Login Password o The default password is widely known. It is very dangerous to use the password without changing it. Set a password that is not easily guessed. It is also recommended to change the password regularly. Others o This camera will perform the initial operation of pan/tilt/zoom upon powering on. o The camera body may be captured in the recording depending on the pan, tilt or zoom position. o Do not subject the lens to strong light source such as sun rays.
Names of Parts A B C D E F Getting Started A LINE OUT terminal LINE IN terminal DC 12V terminal LAN terminal USB 2.0 terminal USB 3.0 terminal U S G 3G-SDI terminal H HDMI terminal I RESTORE switch (Reset switch) Memo : 0 Press and hold down to activate reset. B C . A Tally lamp T Light turns on or goes off during external control. Turns on/off according to the menu setting and blinks depending on the status of this camera. B STANDBY lamp Lights up in green during standby.
Corresponding Pins between Camera and Windows DB-9 Windows DB-9 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.IR OUT 8.NC 1.CD 2.RXD 3.TXD 4.DTR 5.GND 6.DSR 7.RTS 8.CTS 9.RI . Corresponding Pins between Camera and Mini DIN Camera Mini DIN 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.IR OUT 8.NC 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.NC 8.NC .
Infrared Remote Control A Getting Started B C 2 3 4 REV 1 2 3 4 5 6 7 8 9 0 F1 D Q CAMERA SELECT 1 STD F2 F3 PRESET E P F4 HOME F MENU SLOW ZOOM O N M L RESET FAST G I H L/R SET BACKLIGHT P/T RST AUTO FAR NEAR FOCUS MANUAL K J . A STANDBY button Switches between the standby and normal modes. Memo : 0 Power consumption in the standby mode is approximately half of that in the normal mode. B NUMBER button For preset configuration or invoking a preset number.
P # button To be used together with other buttons. Q CAMERA SELECT button Press the number of the camera you want to control using the infrared remote control. Memo : 0 The remote control unit makes use of 2 AAA dry-cell batteries. 0 Make sure to load the battery in the correct +/orientation. Image freeze feature Pressing the [F4] button freezes the video image and displays a “freeze” caption at the top left corner of the screen for about 5 seconds.
Basic System Diagram 3.5 mm audio cable (Sold separately) Getting Started 3.5 mm audio cable (Sold separately) RS485 Cable (Sold Separately) RS232C Cable (Supplied) RS232 Cable (Sold Separately) 3G-SDI cable (Sold separately) HDMI cable (Sold separately) US USB cable (Sold separately) LAN cable (Sold separately) Computer, TV, VCR with Audio Input Jack, AC adapter (Supplied) Router or Hub, Speaker Power cord (Supplied) Microphone, etc. DC 12V IN .
Mounting the Camera to the Ceiling Mount Bracket Memo : 0 Check that the screws are tighten securely when mounting is completed. 0 Be sure to put on protective glasses to protect Memo : 0 The ceiling mount bracket is not necessary when the camera is installed on a desktop or attached to a tripod. 0 If necessary, make a hole (Φ40 mm) to route the connection cable and fall prevention wire (ceiling) into the ceiling. Caution : 0 The fall prevention wire (for ceiling) is not supplied.
Installing the Camera on the Ceiling 4 Use three M3 screws that come with the camera to attach Configure the video format settings using the SYSTEM SELECT switch before installing. You are recommended to update the firmware to the latest version before installing. (A P26 [Firmware Update] ) Installation/Connection 1 Remove the 4 feet from the bottom surface of the camera . Fasten the drop prevention wire (sold separately) together with one of the screws. .
Installing the Camera on a Desktop Connect the cables after these procedures. Attaching the Camera to a Tripod Configure the video format settings using the SYSTEM SELECT switch before installing. 0 Attach a tripod using the screw hole at the bottom of this product. (1/4-20UNC, ISO1222 (6.35 mm)) 0 To prevent the camera from falling off, which may result in injuries or damages, read the “INSTRUCTIONS” of the tripod to be used and make sure that it is securely attached.
Network Features Operating Environment Installation/Connection Operation has been verified for the following environments. 0 Computer 0 OS: Windows 10 Web browser: Google Chrome 0 OS: macOS 10.12. 6 Web browser: Google Chrome IP address settings There are two ways to configure the IP address of the camera. A Log in to the web page, and select [Network] B [Lan Settings] to make changes to the IP address, subnet mask and gateway. Click “Submit” to restart the camera. B Use “upgrade_standard.
3 After changing the value of “IP Address”, “NetMask”, and “GateWay” is complete, click the [Set] button Confirming the Connection . 0 When the setting is successful, the following display appears and the camera restarts. 2 Enter the user name and password Enter the user name (jvc) and the password (initial password: 0000) on the login screen to display the Live View screen. Memo : 0 The screen for changing the password is displayed when you log in for the first time. Please change the password. . .
Firmware Update Installation/Connection Update the firmware of the camera from a Windows PC. You are recommended to update the firmware to the latest version once it has been released to the public. Memo : 0 Download “upgrade_standard.exe” and the firmware update file from the URL link on the cover page of this manual. 4 Click the [Query] button under the [Upgrade] tab The current firmware version is displayed.
View Remote Screen A B . E G J K M Q R S Memo : 0 Some menu items may not be configurable depending on the operating mode and status of the camera. A Live Displays the camera’s video image. Memo : 0 Audio is not output. 0 Supports full-screen display. 0 To display the menu on the live screen, configure [Encode Codec] of [First stream] or [Second stream] to “H.264”. If the menu display is too small, increase the [Resolution] for [First stream] or [Second stream] accordingly.
Video This is the setting screen for the HDMI/SDI terminal and streaming video. After configuring the different items, press the [Submit] button. The settings will be applied when the camera is next restarted. Video Settings Using View Remote 9 HDMI/SDI Output For selecting the video output destination. [Setting Values: RHDMI, SDI] 9 Video Format For selecting the video output frame rate.
Image Audio For adjusting the video quality. After configuring the different items, press the [Submit] button. Memo : 0 If the camera is restarted without pressing the [Submit] button, the settings will be restored to those before the change. Pressing the [Default] buttons restores the settings to the factory default. 0 To display the menu on the camera’s video image, configure [Encode Codec] of [First stream] or [Second stream] to “H.264”.
System Network For restarting the system and management of users. For configuring network-related settings. After configuring the different items, press the [Submit] button. For Lan Settings, press the [Submit] button below Lan Settings. For other settings, press the [Submit] button right at the bottom. The settings will be applied when the camera is next restarted. Initialize 9 Reboot Restarts the camera. Use this function to apply new video or audio settings.
Port Settings SRT Settings 9 SRT Configuring it to “on” and pressing the Save button starts SRT streaming after the camera is restarted. 9 RTSP Port For configuring the RTSP port. [Setting Values: R554 or 1025 to 65535] 9 SRT Mode For configuring the SRT connection mode. [Setting Values: RListener, Caller] 9 TCP Port For configuring the TCP port. [Setting Values: 1025 to 65535 (R5678)] 9 SRT Server For setting the address of the SRT server. The default value is 192.168.100.1.
RTSP Settings 9 RTSP Auth Configuring to “on”, the user name and password are required to receive streaming. [Setting Values: on, off] Multicast Settings NTP Settings Enables display of time information acquired from the NTP server on the streaming video. 9 NTP time sync Configuring to “on” enables time information to be acquired from the NTP server. [Setting Values: Ron, off] Using View Remote 9 Multicast Configuring to “on” enables RTP (Real-time Transport Protocol) multicast streaming.
NDI Config T U This is the setting screen for the NDI (Network Device Interface) protocol. NDI Settings 9 NDI Local Device Name For configuring the device name displayed in the NDI application. Default value: “PZ400” T, “PZ200” U 9 NDI Firmware Version Displays the NDI firmware version. Information 9 Device ID For configuring the device name of this unit. 9 Device Type Displays the device type of this unit. 9 Software Version Displays the current software version.
Basic Shooting Procedures Preparations 1 Supply power to the camera via a LAN cable or AC adapter (A P23 [Connecting the Cables] ) 2 Configure the IP address of the camera For viewing the IP address of the camera and configuring the IP address. (A P24 [Checking the IP address] ) (A P24 [IP address settings] ) 3 Check the connection (A P25 [Confirming the Connection] ) Shooting Memo : 0 You are recommended to operate this camera by connecting it to a PC or a controller.
Performing Live Streaming By combining with the decoder or PC application that supports live streaming, you can perform audio and video streaming via the network. Supported Codecs H.264, H.265, Motion JPEG Memo : 0 When the supported codec is configured to “H. 265” and the resolution to “3820x2160”, live streaming is possible only for RTSP/RTP.
Supported Streaming Formats Streaming formats that are supported using the SYSTEM SELECT switch setting are as follows. Configure the SYSTEM SELECT switch according to the format to be used for streaming. o When [Video]B[Video Settings]B[Video Format] in the web menu is configured to “Dial Priority” Resolution A Connecting to the Network C *1 *2 *3 *4 36 29.97p *3 25p 0, 2, 5, B 60p 7, 8, 9 59.94p *4 1, 3, F 50p 4 30p 6 29.97p *3 E 25p .
o When [Video]B[Video Settings]B[Video Format] in the web menu is configured to “60Hz” Resolution 320x240 480x320 640x360 *2 640x480 720x408 60p 720x480 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, B, E, F 1024x576 30p 1280x720 A, C, D Stream 1920x1080 Frame Rate (Max.) 3840x2160 SYSTEM SELECT Switch First *1 Second First Second .
Menu Screen Hierarchical Chart Menu ..................................................... (A P 39) Menu Display and Detailed Settings - EXPOSURE ...................................... (A P 39) - Mode ............................................ (A P 39) - ExpCompMode ............................ (A P 39) - ExpComp ............................... (A P 39) - Backlight ....................................... (A P 39) - Iris ................................................ (A P 40) - Shutter .................
GUI Settings Menu Pressing the [MENU] button on the infrared remote control unit displays the main menu on the HDMI/SDI and streaming screens. You can move the cursor using the arrow buttons. Use the [HOME] button to enter the corresponding menu. Exposure Mode For selecting the method for controlling the exposure. 0 Auto Gain/Shutter/Iris are adjusted automatically. 0 Manual Gain/Shutter/Iris operate according to the menu setting.
Iris Gain Limit For configuring the iris value (F number). [Setting Values: RF1.8, F2.0, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11.0, Close] Memo : 0 This item can be configured when [Mode] is configured to “Manual” or “AAE”. Shutter Menu Display and Detailed Settings For configuring the shutter speed.
Color WB Mode For setting the white balance mode. 0 Auto Automatically adjusts the white balance according to the color temperature of the lighting for illuminating the subject. 0 Indoor For configuring to a color temperature that is suitable for indoor shooting. 0 Outdoor For configuring to a color temperature that is suitable for outdoor shooting.
Image Luminance For adjusting the brightness. [Setting Values: 0 to 14 (R7)] * When [Style] is set to a value other than “Bright” [Setting Values: 0 to 14 (R8)] * When [Style] is set to “Bright” Contrast For adjusting the contrast. [Setting Values: 0 to 14 (R7)] * When the [Style] item is configured to “Default” or “Norm” [Setting Values: 0 to 14 (R9)] * When the [Style] item is configured to “Bright” or “PC” Sharpness Menu Display and Detailed Settings Adjusts the outline correction value.
Noise Reduction NR3D-Level For configuring 3D noise reduction. [Setting Values: Auto, Off, 1 to 11 (R6)] Setup Language Switches between languages in the menu screen. [Setting Values: REnglish, Français, Deutsch, Italiano, Español, русский, 中文, 日本語] DVI Mode SDI-3G Mode For setting the 3G-SDI mapping structure. [Setting Values: RLEVEL-A,LEVEL-B] Video Output For setting the terminal to output the video.
Restore Default Restore? Resets all the menu item settings except for the language setting. [Setting Values: No, Yes] Memo : 0 Press the [HOME] button to confirm the selection. Preset values will also be initialized. IP address, web password and View Remote settings will not be initialized. P/T Limit Reset Resets only the menu settings. [Setting Values: No, Yes] Memo : 0 Press the [HOME] button to confirm the selection.
Troubleshooting Problem Video image does not appear on the monitor Sometimes the video image is not displayed Video image becomes blurry when zoomed to the Tele end Video image does not appear on the Web browser Unable to access camera from the Web browser Action 0 Check to ensure that the power supply of the camera is properly connected, the power voltage is normal and the POWER lamp is on at all times. 0 Restart the camera and check whether the camera has been initialized.
Specifications Item [3G-SDI] terminal General Item Power Current consumption Mass Allowable operating temperature Allowable operating humidity Allowable storage temperature Dimensions (W × H × D) (*3) Description DC 12 V (when an AC adapter is used) PoE T: 0.62 A (*1), 0.18 A (*2) U S: 0.65 A (*1), 0.19 A (*2) T: Approx. 1.7 kg U S: Approx. 1.5 kg 0 °C to 40 °C (32 °F to 104 °F) 30 %RH to 80 %RH (No condensation) -20 °C to 50 °C (-4 °F to 122 °F) Others T: 141.5 mm x 164.5 mm x 168.4 mm U S: 141.
Rotation Mechanism Section Item Horizontal viewing angle Description T: 71° to 8.2° U S: 60.7° to 3.36° Vertical viewing T: 42.7° to 4.5° angle U S: 34.1° to 1.89° Horizontal ±170° rotation range Vertical rotation -30° to +90° range Horizontal 1.7° to 100°/second rotation speed Vertical rotation 1.7° to 69.9°/second speed Video Item Signal system T Signal system US Description 3840x2160/30p, 25p, 29.97p 1920x1080/60p, 50p, 30p, 25p, 59.94p, 29.97p, 60i, 50i, 59.94i 1280x720/60p, 50p, 59.
Dimensional Outline Drawing (Unit: mm) KY-PZ400N 164.5 Φ70.7 141.5 168.4 . KY-PZ200N/KY-PZ200 Φ70 164 Others 141.5 . 168.4 * The specifications and appearance of this product are subject to changes for further improvement without prior notice.
Software License Agreement The software embedded in the Product (hereinafter the “Licensed Software”) provided by JVCKENWOOD Corporation (hereinafter the “Licensor”) is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 9 Destruction of the Licensed Software If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination. Article 10 Export Restriction 1. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries. 2.
B5A-4107-10 © 2022 JVCKENWOOD Corporation 4K PTZ REMOTE CAMERA KY-PZ400NWU/KY-PZ400NWE/KY-PZ400NBU/KY-PZ400NBE HD PTZ REMOTE CAMERA KY-PZ200NWU/KY-PZ200NWE/KY-PZ200NBU/KY-PZ200NBE/ KY-PZ200WU/KY-PZ200WE/KY-PZ200BU/KY-PZ200BE .